Best picks

Best 3/8 Inch Air Hose Repair Kits: Top 9 Picks (November 2026)

Updated on · By the Top Cool DIY team

The best 3/8 inch air hose repair kits include the WHK 12 PACK Air Hose Repair Kit for barbed hose to threaded ports, the CNZG PNEU 3/8 OD Inch Air Line Hose for push to connect tubing kits, and the ChillWaves Brass Hose Barb Fittings for straight barb splices.

On this page (7 sections)
  1. 3/8 inch air hose repair kits compared
  2. Which 3/8 inch repair kit fits your hose type?
  3. How we compared these kits
  4. How do I choose the best 3/8 inch air hose repair kit?
  5. How do I repair a cut 3/8 inch hose without replacing it?
  6. When should I replace the hose instead of repairing it?
  7. Verdict: which 3/8 inch air hose repair kit should you buy?

The best 3/8 inch air hose repair kit for most shops is the WHK 12 PACK, with 3/8 inch barb to 1/4 inch NPT brass adapters and 12 stainless clamps that let you cut out damage and reconnect the hose. If your line is smooth push to connect tubing, the CNZG PNEU kit is a better match.

If you only need to splice two barbed ends together, ChillWaves gives you 12 splicers for that single job.

A repair kit only works when the fitting style matches your hose. Barbed fittings grip hose that slides over ridges.

Push to connect fittings grip smooth tubing by its outside diameter. Threaded adapters join a hose to a port.

Measure first, then match the style.

Our score weighs specs, features and buyer feedback against what you're shopping for. We compared size, material, piece count, pressure limits and included parts across all nine picks.

Start with our air hose guide if you are not sure which hose type you own. Our step by step on how to repair air hose walks through cutting, fitting and pressure testing a splice.

Our picks at a glance

  1. 1 WHK 12 PACK Air Hose Repair Kit
    Best for barbed hose to threaded ports

    WHK 12 PACK Air Hose Repair Kit

    9.7/10 our score

    See it on Amazon
  2. 2 CNZG PNEU 3/8 OD Inch Air Line Hose
    Best for push to connect tubing kits

    CNZG PNEU 3/8 OD Inch Air Line Hose

    9.6/10 our score

    See it on Amazon
  3. 3 ChillWaves Brass Hose Barb Fittings
    Best for straight barb splices

    ChillWaves Brass Hose Barb Fittings

    9.5/10 our score

    See it on Amazon
  1. 4CheeMuii 23PCS Brass DOT Air Line Fittings

    CheeMuii 23PCS Brass DOT Air Line Fittings

    Best for DOT push lock unions
    Check it
  2. 5WYNNsky Industrial Air Coupler and Plug Kit

    WYNNsky Industrial Air Coupler and Plug Kit

    Best for high flow couplers and plugs
    Check it
  3. 6EilxMag 3/8 Air Line Tubing Kit

    EilxMag 3/8 Air Line Tubing Kit

    Best for nylon air line replacement
    Check it
  4. 7KOOTANS 32PCS Brass Hose Barb Fittings Barb

    KOOTANS 32PCS Brass Hose Barb Fittings Barb

    Best for mixed barb sizes and clamps
    Check it
  5. 8mxuteuk 324PCS Quick Connect Air Hose Fittings

    mxuteuk 324PCS Quick Connect Air Hose Fittings

    Best for large push to connect assortments
    Check it
  6. 9Pikwo 2-Pack 3/8 in Hydraulic Hose Field

    Pikwo 2-Pack 3/8 in Hydraulic Hose Field

    Best for reusable hydraulic field repairs
    Check it

3/8 inch air hose repair kits compared

The WHK kit leads for common barbed hose repairs because it joins the hose to a 1/4 inch NPT port and includes clamps. Tubing kits lead when the damaged line is smooth 3/8 inch OD tube.

Splicers lead when both ends are the same barbed hose.

1

WHK 12 PACK Air Hose Repair Kit: Best for barbed hose to threaded ports

WHK 12 PACK Air Hose Repair Kit, 3/8 inch air hose repair kits
9.7/10Our score
  • 3/8 inch barb x 1/4 inch male NPT
  • Solid brass fittings
  • 12 stainless steel hose clamps
  • Sealant coated male ends

A 12 pack of 3/8 inch barb to 1/4 inch NPT brass adapters with clamps, made to rejoin a cut hose and reconnect it to a threaded port.

See it on Amazon

Pros

  • 12 adapters for repeated repairs
  • Stainless steel clamps resist rust
  • Sealant coated threads reduce tape use

Cons

  • Barbed type only
  • Needs a hose that fits a 3/8 inch barb

WHK suits anyone with a standard rubber or PVC shop hose that has a cut, a split end or a leaking fitting at the tool. The 12 adapters are 3/8 inch barb on one end and 1/4 inch male NPT on the other, which matches most air tool and compressor ports.

Solid brass construction resists scratches and corrosion in a garage environment. The male threads come coated with sealant, so you can skip separate sealing tape on those threads.

Each fitting also comes with a stainless steel clamp that bites the hose and locks the barb in place.

The 12 pack format matters if you repair hoses often or run several tools. You can fix one hose now and keep spares for the next cut.

The trade off is that this kit only does barbed hose to threaded port jobs. It will not splice two hose ends together without a port, and it will not fit smooth push to connect tubing.

WHK 12 PACK Air Hose Repair KitCheck it on Amazon
2

CNZG PNEU 3/8 OD Inch Air Line Hose: Best for push to connect tubing kits

CNZG PNEU 3/8 OD Inch Air Line Hose, 3/8 inch air hose repair kits
9.6/10Our score
  • 32.8 ft of 3/8 inch OD PU tube
  • Push to connect fittings included
  • Hose cutter included
  • 0 to 145 psi working pressure

A 32.8 foot polyurethane tube kit with push fittings and a cutter, for replacing a damaged section or building a new air line.

See it on Amazon

Pros

  • Includes tube, fittings and cutter
  • Long 32.8 ft length covers many runs
  • Push fittings allow reconfiguration

Cons

  • For 3/8 inch OD tubing, not barbed hose
  • Pressure limit is lower than some kits

CNZG PNEU suits you when your damaged line is 3/8 inch OD polyurethane tubing rather than a thick rubber hose. The kit includes 32.8 feet of blue PU tube, push to connect fittings in straight and elbow styles, plastic fittings, Teflon tape and a hose cutter.

Working pressure is rated from 0 to 145 psi for air compressor use. That covers typical shop air pressure for pneumatic tools.

The tube works from -4 F to 176 F, so it handles a cold garage in winter and a warm shop in summer.

The included cutter gives you a clean square cut, which push fittings need to seal well. You can cut the tube to length, push it into a fitting and reconfigure the route as you plan your shop layout.

The trade off against WHK is style. This kit cannot grip a barbed rubber hose.

It also cannot join a hose to a threaded port unless the included threaded push fittings match your port. Check that your existing line is 3/8 inch OD tubing before choosing it.

CNZG PNEU 3/8 OD Inch Air Line HoseCheck it on Amazon
3

ChillWaves Brass Hose Barb Fittings: Best for straight barb splices

ChillWaves Brass Hose Barb Fittings, 3/8 inch air hose repair kits
9.5/10Our score
  • 3/8 inch barb x 3/8 inch barb
  • 12 pack brass splicers
  • 1200 psi maximum working pressure
  • -65 F to 250 F temperature range

Twelve brass barb splicers that join two 3/8 inch hoses end to end for a mid hose repair or extension.

See it on Amazon

Pros

  • 12 splicers for many repairs
  • High stated pressure and temperature range
  • Works with PU, PVC, PE and rubber hose

Cons

  • No threaded end for ports
  • No clamps included

ChillWaves suits a simple mid hose repair where you cut out a damaged section and join the two remaining ends. Each splicer has a 3/8 inch barb on both ends, so both hose ends slide over ridges and lock in place.

The 12 pack gives you 12 splicers, which is plenty for a shop that patches several hoses over a season. Brass resists wear and corrosion, and the barbed ends are smooth and burr free so they slide in without tearing the hose wall.

ChillWaves rates these fittings for a maximum working pressure of 1200 psi and a temperature range of -65 F to 250 F. That range is well above normal shop air needs.

The fittings work with PU, PVC, PE and rubber hose, plus water, fuel and air lines.

The trade off is that a splicer only joins hose to hose. It has no threaded end, so it cannot reconnect a hose to a compressor or tool port.

It also includes no clamps, so plan on hose clamps if your hose needs them to hold under pressure.

ChillWaves Brass Hose Barb FittingsCheck it on Amazon
4

CheeMuii 23PCS Brass DOT Air Line Fittings: Best for DOT push lock unions

CheeMuii 23PCS Brass DOT Air Line Fittings, 3/8 inch air hose repair kits
9.3/10Our score
  • 23 pieces including tube cutter
  • 3/8 inch, 1/4 inch and 1/2 inch unions
  • CA360 brass
  • 300 psi maximum working pressure

A 23 piece DOT push to connect assortment with 3/8 inch straight unions and a tube cutter for air brake and air line tubing.

See it on Amazon

Pros

  • Includes 3/8 inch unions and cutter
  • CA360 brass with DOT approval stated
  • Three sizes in one box

Cons

  • Straight unions only
  • Focused on DOT tubing use

CheeMuii suits DOT air line work, including truck and trailer air brake tubing and workshop air lines built from 3/8 inch tubing. The 23 piece kit includes 8 straight unions in 3/8 inch, plus 1/4 inch and 1/2 inch unions and one tube cutter.

CA360 brass construction meets DOT FMVSS 571.106 and SAE J1131 requirements as stated by CheeMuii. Push to connect ends seal when you push the tube firmly into the fitting.

Removal is simple once you release the collet.

The kit is rated for pressures from vacuum to 300 psi and temperatures from -40 F to 200 F. For a shop air line, that pressure range gives you headroom above typical compressor output.

The included cutter helps you make the clean cuts that push fittings need.

The trade off against tubing kits such as CNZG PNEU is content. CheeMuii gives you unions and a cutter, but no replacement tube.

If a section of tube is missing, you need to buy tube separately. It also offers straight unions only, with no elbows or tees for routing around corners.

CheeMuii 23PCS Brass DOT Air Line FittingsCheck it on Amazon
5

WYNNsky Industrial Air Coupler and Plug Kit: Best for high flow couplers and plugs

WYNNsky Industrial Air Coupler and Plug Kit, 3/8 inch air hose repair kits
9.1/10Our score
  • 3/8 inch high flow body size
  • 1/4 inch NPT threads
  • 9 pieces couplers and plugs
  • 300 psi maximum working pressure

Nine steel couplers and plugs with a 3/8 inch body and 1/4 inch NPT threads, for rebuilding the quick connect ends of a hose.

See it on Amazon

Pros

  • High flow 3/8 inch body size
  • Mixed male and female couplers and plugs
  • Six locking balls hold plugs securely

Cons

  • Couplers and plugs, not hose splicers
  • Seal tape needed for threads

WYNNsky suits a hose whose quick connect end is worn, leaking or mismatched to your tools. The kit rebuilds the connection point rather than splicing the hose wall.

It includes 1 coupler with 1/4 inch male NPT, 2 couplers with 1/4 inch female NPT, 4 plugs with 1/4 inch male NPT and 2 plugs with 1/4 inch female NPT.

The 3/8 inch high flow body size is the main reason to pick this kit. WYNNsky states that 3/8 inch body fittings provide up to 70 percent more air flow than 1/4 inch body fittings.

Higher flow helps air hungry tools keep up when the compressor is running at 100 psi.

Six locking balls in the coupler hold the plug securely, and a sleeve guard reduces accidental disconnects. The heat treated steel plug and zinc plated steel coupler resist corrosion.

Maximum working pressure is 300 psi.

The trade off is scope. These are couplers and plugs only.

They will not repair a cut in the middle of a hose. Threaded ends need seal tape.

If your damage is in the hose wall, choose a splicer or barb adapter instead.

WYNNsky Industrial Air Coupler and Plug KitCheck it on Amazon
6

EilxMag 3/8 Air Line Tubing Kit: Best for nylon air line replacement

EilxMag 3/8 Air Line Tubing Kit, 3/8 inch air hose repair kits
8.9/10Our score
  • 32.8 ft of 3/8 inch OD nylon tube
  • Push to connect fittings assortment
  • Tube cutter and Teflon tape
  • 800 psi maximum working pressure

A 32.8 foot nylon tube kit with elbows, tees, unions and threaded push fittings, for replacing a long damaged air line run.

See it on Amazon

Pros

  • Full fitting assortment for routing
  • Long tube plus cutter and tape
  • Rotating push fittings aid layout

Cons

  • For OD tubing, not barbed hose
  • Large assortment may be more than a single splice needs

EilxMag suits a full air line replacement where the damaged run is long or routed through elbows and tees. The kit includes 32.8 feet of 3/8 inch OD nylon tube that meets DOT standards and SAE J844 requirements, plus a full set of push fittings.

The fitting count is a strength. You get splitters, straight unions, elbows, tees, male straight and elbow adapters in 1/4 inch and 3/8 inch NPT, cap plugs, a tube cutter and Teflon tape.

Push to connect ends rotate 360 degrees, so you can adjust orientation after installation.

Nylon tube is rated for a maximum working pressure of 800 psi and temperatures from -40 F to 248 F. Stainless steel locking claws in the fittings grip the tube firmly.

The tube connects to PU, PA, PE and PVC lines.

The trade off against a focused splice kit is size. This is a complete re tubing kit, not a small patch.

If you only need to join two ends of one hose, a splicer pack costs less in effort. Choose EilxMag when you want to reroute or replace a whole line.

EilxMag 3/8 Air Line Tubing KitCheck it on Amazon
7

KOOTANS 32PCS Brass Hose Barb Fittings Barb: Best for mixed barb sizes and clamps

KOOTANS 32PCS Brass Hose Barb Fittings Barb, 3/8 inch air hose repair kits
8.6/10Our score
  • 32 brass barb splicers
  • 46 stainless steel pipe clamps
  • Sizes from 3/16 to 1/2 inch
  • CA360 premium forged brass

Thirty two barb splicers in five sizes with 46 clamps, including six 3/8 inch splicers for shops that repair several hose sizes.

See it on Amazon

Pros

  • Six 3/8 inch splicers plus other sizes
  • 46 clamps included
  • Solid brass construction

Cons

  • Fewer 3/8 inch pieces than a dedicated pack
  • Splicers only, no threaded adapters

KOOTANS suits a shop that repairs more than one hose size. The kit includes 32 brass barb splicers in five sizes, with 6 of them in 3/8 inch, plus 46 stainless steel pipe clamps.

Other sizes cover 3/16, 1/4, 5/16 and 1/2 inch hose.

CA360 premium forged brass gives the splicers a thicker, stronger body than light duty fittings. The barb ends are smooth without burrs, so they enter the hose without cutting the wall.

Clamps lock both ends of the splice so the joint resists leaks under pressure.

This mixed size format helps if you maintain several tools, a spray gun line and a blow gun line in the same shop. Each hose size gets its own correct barb diameter instead of forcing one size to fit all.

The trade off against WHK or ChillWaves is depth in 3/8 inch. You get 6 splicers in 3/8 inch rather than 12.

The kit also has no threaded adapters, so it cannot join a hose to a port. Choose it for variety, not for a single size repair.

KOOTANS 32PCS Brass Hose Barb Fittings BarbCheck it on Amazon
8

mxuteuk 324PCS Quick Connect Air Hose Fittings: Best for large push to connect assortments

mxuteuk 324PCS Quick Connect Air Hose Fittings, 3/8 inch air hose repair kits
8.4/10Our score
  • 324 pieces in storage container
  • Sizes from 1/8 to 1/2 inch
  • Nickel plated brass and plastic
  • Straight, elbow, tee and valve fittings

A 324 piece push to connect assortment in a storage container, for shops that rework air lines often and want many 3/8 inch fittings on hand.

See it on Amazon

Pros

  • Large count covers many layouts
  • Includes valves and blanking plugs
  • Storage container keeps sizes sorted

Cons

  • Far more pieces than a single repair needs
  • Mixed brass and plastic construction

mxuteuk suits a shop that rebuilds air lines often and wants a deep stock of push to connect fittings. The 324 piece kit covers sizes from 1/8 to 1/2 inch, including 3/8 inch, and comes in a durable storage container.

The contents go beyond basic unions. You get straight connectors, 90 degree elbows, female straight connectors, flow control valves, splitters, tees, elbows, straight unions, blanking plugs and a tubing cutter.

A circular release ring style design and 360 degree rotating caps make installation and removal easier.

Fittings are made from nickel plated brass and high quality plastic for corrosion resistance and durability. An internal locking clip spring holds the tube securely after engagement.

The assortment fits automotive, workshop equipment, air suspension and pneumatic tool applications.

The trade off is that 324 pieces is far more than a single hose repair needs. It also mixes brass and plastic, so check the material of the specific fitting you plan to use at pressure.

Choose mxuteuk for a shop that reconfigures lines often, not for one quick splice.

mxuteuk 324PCS Quick Connect Air Hose FittingsCheck it on Amazon
9

Pikwo 2-Pack 3/8 in Hydraulic Hose Field: Best for reusable hydraulic field repairs

Pikwo 2-Pack 3/8 in Hydraulic Hose Field, 3/8 inch air hose repair kits
8.1/10Our score
  • 2 pack reusable repair kits
  • For 3/8 inch ID, 0.68 inch OD hose
  • Rated for 4000 psi wire braided hose
  • Zinc plating

Two reusable field repair kits for 3/8 inch ID two wire braided hydraulic hose with 0.68 inch outside diameter, to get equipment running until a replacement hose arrives.

See it on Amazon

Pros

  • Reusable fittings
  • Made for 4000 psi rated braided hose
  • Zinc plating resists corrosion

Cons

  • Hydraulic specific, check hose OD exactly
  • Only two kits in the pack

Pikwo suits hydraulic hose work, not standard shop air hose repair. The 2 pack is made for 3/8 inch inside diameter, 0.68 inch outside diameter two wire braided hydraulic hose, including R2, R16, R17 and R19 hose types.

The kits are reusable. Zinc plating protects against corrosion.

In a field emergency, the kit lets you repair a hose on equipment such as a dozer, tow truck or snow plow and keep working until a replacement hose can be installed.

That reusability makes it a good item to keep in a truck or barn.

Pikwo rates these kits for double wire braided hydraulic hoses rated at 4000 psi. That rating applies only when your hose matches the specified inside and outside diameters and construction.

It is not suitable for super high pressure skive hose.

The trade off is specificity. This is the only hydraulic focused pick here, and it will not fit a standard air hose or a hose with a different outside diameter.

Measure the outside diameter exactly before ordering. If your hose is a normal shop air hose, choose a barb or push kit instead.

Pikwo 2-Pack 3/8 in Hydraulic Hose FieldCheck it on Amazon

Which 3/8 inch repair kit fits your hose type?

Barbed kits fit hose that slides over ridges. Push to connect kits fit smooth tubing measured by outside diameter.

Threaded kits fit a hose end that must screw into a port.

Barbed hose with clamps

Choose WHK when one end must reach a 1/4 inch NPT port. Choose ChillWaves or KOOTANS when both ends are hose and you need a straight splice.

Clamps are essential on many barbed joints, so check whether your pick includes them.

Smooth tubing with push fittings

Choose CNZG PNEU or EilxMag when your line is 3/8 inch OD PU or nylon tube. Choose CheeMuii for DOT unions.

Choose mxuteuk for a deep assortment of sizes and shapes. Push fittings need a clean square cut, so a kit with a cutter helps.

Quick connect ends

Choose WYNNsky when the hose wall is fine but the coupler or plug leaks or wears out. A high flow 3/8 inch body helps tools that need more air at 100 psi.

This kit does not repair a cut in the hose wall.

ProductBest forSizeMaterialPiecesOur score
WHK 12 PACK Air Hose Repair Kitbarbed hose to threaded ports3/8 inch barb x 1/4 inch NPTBrass12 fittings with 12 clamps9.7
CNZG PNEU 3/8 OD Inch Air Line Hosepush to connect tubing kitsPolyurethane9.6
ChillWaves Brass Hose Barb Fittingsstraight barb splices3/8 inch x 3/8 inch barbBrass129.5
CheeMuii 23PCS Brass DOT Air Line FittingsDOT push lock unionsCA360 brass239.3
WYNNsky Industrial Air Coupler and Plug Kithigh flow couplers and plugs99.1
EilxMag 3/8 Air Line Tubing Kitnylon air line replacementPolyamide 12 nylon8.9
KOOTANS 32PCS Brass Hose Barb Fittings Barbmixed barb sizes and clampsBrass32 fittings with 46 clamps8.6
mxuteuk 324PCS Quick Connect Air Hose Fittingslarge push to connect assortmentsBrass and plastic3248.4
Pikwo 2-Pack 3/8 in Hydraulic Hose Fieldreusable hydraulic field repairs3/8 inch ID, 0.68 inch OD28.1

How we compared these kits

We compared fitting style, hose size, material, piece count, pressure limits and included parts. Barbed kits were judged on barb size, thread size and clamps.

Push kits were judged on tube size, tube length, cutter inclusion and union sizes.

We checked that each kit actually covers 3/8 inch work. A mixed assortment counts only if it includes enough 3/8 inch pieces for the stated job.

A tubing kit counts only if it includes 3/8 inch OD tube or 3/8 inch unions.

We also looked at what each kit leaves out. Splicers without clamps, unions without tube and couplers without splicers all have a place, but the missing part affects the total job.

Our score reflects that full picture.

How do I choose the best 3/8 inch air hose repair kit?

The best kit matches your hose style first and your pressure needs second. Start by measuring the hose outside diameter and identifying whether the end is barbed or smooth.

What size is your hose?

Measure the outside diameter with calipers or a tape. For barbed hose, also confirm the inside diameter that must slip over the barb.

For tubing, confirm 3/8 inch OD exactly, because push fittings seal on the outside wall.

What does the damaged end need to connect to?

If the end connects to a compressor or tool port, you need a threaded adapter such as 1/4 inch NPT. If both ends are hose, you need a splicer.

If the end is a quick connect coupler, you need a coupler and plug set.

What pressure will the repair see?

Check the pressure rating of the kit against your compressor regulator setting. Most shop air tools run well below 150 psi.

Kits rated at 300 psi or higher give headroom. Hydraulic hose is a separate case, so match the Pikwo kit only to the hose diameters it specifies.

If you own a 1/4 inch hose instead, our best 1/4 inch air hose repair kit guide covers that size. If you need a crimping tool for permanent ferrules, our best air hose repair kit with crimper guide covers that route.

How do I repair a cut 3/8 inch hose without replacing it?

Cut out the damaged section, fit the correct splicer or adapter to each end and test the joint under pressure. Clean cuts and matched sizes matter more than force.

Step 1: Cut and measure

Depressurize the line and cut the hose square at each end of the damage. Remove the damaged piece fully.

Slide a clamp or nut over the hose before you push on the fitting, because you cannot add it after.

Step 2: Fit the splice

Push the hose over a barb until it seats fully, then tighten the clamp. For push tubing, push the tube firmly into the collet until it seats.

For a threaded adapter, screw the NPT end into the port with seal tape or sealant as the fitting requires.

Step 3: Test for leaks

Pressurize the line slowly and listen and feel for leaks at the joint. A soap solution can help you see small bubbles at the seal.

If a joint leaks, reseat it or replace the fitting rather than tightening a push fitting harder.

Our flexzilla air hose repair guide covers repairs on that specific hose brand. Reusable hydraulic fittings, such as the Pikwo kit, follow different torque and hose preparation rules, so follow the instructions for your hose type.

When should I replace the hose instead of repairing it?

Replace the hose when the damage is long, the wall is cracked in several places or the hose is hardened and brittle. A splice joints two sound ends, not a failing hose.

Signs a repair will not hold

Check for cracks away from the cut, bulges in the wall or ends that split when you flex them. Those signs mean the remaining hose may fail at the next weakest point.

A new hose gives you a known age and condition.

When a repair is the right call

A clean cut, a nick near a fitting or a worn coupler are good repair cases. The WHK kit handles a cut near a port.

ChillWaves handles a clean mid hose cut. WYNNsky handles a worn quick connect end.

If the whole line is old or you want to reroute it, a tubing kit such as CNZG PNEU or EilxMag replaces the run instead of patching it. For a new hose altogether, our Best Air Hose For Air Compressor guide helps you compare hose types.

A complete Best Air Compressor Kit can also bundle a hose, fittings and tools together.

Verdict: which 3/8 inch air hose repair kit should you buy?

Pick the WHK 12 PACK if your hose is barbed and must connect to a 1/4 inch NPT port. Its brass adapters, sealant coated threads and 12 stainless clamps cover the most common shop repair.

Pick CNZG PNEU if your line is 3/8 inch OD PU tubing and you need tube, fittings and a cutter in one box. Pick ChillWaves if you only need to splice two barbed ends together and want 12 splicers on hand.

Pick WYNNsky to rebuild a leaking quick connect end with a high flow 3/8 inch body. Pick EilxMag to replace a long nylon air line with elbows and tees.

Avoid the Pikwo kit unless your hose matches its 3/8 inch ID and 0.68 inch OD hydraulic specification exactly.

Measure your hose, match the fitting style and buy the kit that covers the whole job, including clamps or tube if the kit does not include them.

Our top 3 picks at a glance

  1. 1 WHK 12 PACK Air Hose Repair Kit
    Best for barbed hose to threaded ports

    WHK 12 PACK Air Hose Repair Kit

    9.7/10 our score

    See it on Amazon
  2. 2 CNZG PNEU 3/8 OD Inch Air Line Hose
    Best for push to connect tubing kits

    CNZG PNEU 3/8 OD Inch Air Line Hose

    9.6/10 our score

    See it on Amazon
  3. 3 ChillWaves Brass Hose Barb Fittings
    Best for straight barb splices

    ChillWaves Brass Hose Barb Fittings

    9.5/10 our score

    See it on Amazon

Frequently asked questions

How do I know if my hose needs a barbed or push to connect kit?

A barbed kit fits hose that slides over a ridged brass end and locks with a clamp. A push to connect kit fits smooth tubing that pushes into a collet fitting.

Measure the hose outside diameter and check whether the end is a ridged barb or smooth tubing before you buy.

Can a 3/8 inch repair kit fix a cut in the middle of a hose?

Yes, if you cut out the damaged piece and join the two ends. A barb to barb splicer joins two ends of the same size hose.

A threaded barb adapter works when one end must connect to a tool or compressor port instead.

What size should I measure before ordering a 3/8 inch air hose repair kit?

Measure the hose outside diameter, and for barbed fittings, the inside diameter that must slip over the barb. Also confirm the port thread, often 1/4 inch NPT, on the tool or compressor.

A kit marked 3/8 inch may refer to barb size or tube outside diameter, so check both numbers.

Do push to connect fittings need seal tape?

The tube end pushes into the fitting and seals inside the collet, so tape is not used on the tube end. Threaded ends that screw into a port usually need seal tape or thread sealant.

Check each fitting type in your kit before assembly.