9 Best Airbrush Needles and Nozzles (November 2026)

The best airbrush needles and nozzles include the Timbertech® ABPST01 Airbrush Kit for complete size changes, the HUBEST 20Pc Airbrush Cleaning Kit for replacement and cleaning, and the Fengda Timbertech Professional Double Action Airbrush BD-130 for 0.3 mm general painting.

On this page (6 sections)

1. How we chose the best airbrush needles and nozzles
2. Best matched airbrush needles and nozzles
3. How do you choose an airbrush needle and nozzle replacement?
4. What do different airbrush needle and nozzle sizes do?
5. How should you install and care for replacement parts?
6. Best airbrush needles and nozzles: final verdict

The best airbrush needles and nozzles for most users are the Timbertech ABPST01 matched 0.2, 0.3 and 0.5 mm sets. That mix covers fine detail, general painting and broader spray work in one purchase.

Needles and nozzles work as a pair rather than interchangeable spares. A bent needle or damaged nozzle can change the spray pattern, so confirm the model, thread size and diameter before replacing parts.

The 0.2 mm size suits fine detail, 0.3 mm is a practical middle choice, and 0.5 mm supports broader coverage when the airbrush and paint are prepared for it. Keep each needle with its matching nozzle in storage to protect the fine tip.

A full kit suits beginners still learning their preferred size and experienced users who want a spare set ready. A focused repair kit suits an airbrush body that is sound and needs only one size replaced.

Thin and strain paint to suit the chosen diameter. Clean carefully after each session to stop a fine 0.2 mm tip clogging with dried residue.

If you need maintenance supplies, compare our best airbrush cleaning kit guide. For a wider setup, see the best iwata airbrush accessories and best iwata airbrush hose guides.

Our picks at a glance

1. 1
   Best for complete size changes

   Timbertech® ABPST01 Airbrush Kit

   9.7/10 our score

   See it on Amazon
2. 2
   Best for replacement and cleaning

   HUBEST 20Pc Airbrush Cleaning Kit

   9.6/10 our score

   See it on Amazon
3. 3
   Best for 0.3 mm general painting

   Fengda Timbertech Professional Double Action Airbrush BD-130

   9.4/10 our score

   See it on Amazon

4. 4

   Gaahleri Airbrush Seeker

   Best for quick size changes
   Check it
5. 5

   Master Airbrush 0.3 mm Needle

   Best for Master G-series repair
   Check it
6. 6

   Pinkiou Airbrush Kit with Different Nozzle

   Best for a multi-use starter set
   Check it
7. 7

   Master Airbrush .5mm Needle

   Best for Master G-series coverage
   Check it
8. 8

   Actekart Airbrush Nozzles and Bottles Kit

   Best for disposable color changes
   Check it
9. 9

   Uouteo 0.2mm

   Best for four-size repair запас
   Check it

How we chose the best airbrush needles and nozzles

The best airbrush needles and nozzles match the airbrush, cover a useful spray size and make replacement or cleaning easier. We compared stated sizes, included parts, compatibility, connection details and intended use.

Compatibility was a key check because diameter alone does not guarantee a fit. Some kits name specific models, some suit standard dual-action gravity-feed airbrushes, and others are tied to one system.

Our score weighs specs, features and buyer feedback against what you are shopping for. Products are ordered from highest to lowest score, with each badge naming the clearest use.

A 0.2 mm pair suits fine detail, 0.3 mm is a practical middle size, and 0.5 mm suits broader coverage when the airbrush supports it.

Included parts shaped the ranking too. A hose, wrench, pipettes or cleaning tools can remove extra purchases, and a complete matched set with a nozzle cap where stated is easier to fit and store.

We also considered daily use. A complete airbrush suits a user who needs a tool, a reusable set suits routine maintenance, and disposable nozzles suit frequent color changes.

No single kit covers every model or size. The aim was to separate a useful match from a package that simply contains more pieces.

Best matched airbrush needles and nozzles

The Timbertech ABPST01 is the most flexible complete choice because it includes three matched sizes, a wrench, hose, adapter and pipettes. The other products are better when you need a focused model repair, quick size changes or a large supply of disposable nozzles.

1

Timbertech® ABPST01 Airbrush Kit: Best for complete size changes

9.7/10Our score

• 0.2, 0.3 and 0.5 mm needles and nozzles
• 5 ml paint tank
• 2 m fabric hose
• Includes wrench and 4 pipettes

This kit gives you three matched needle and nozzle sizes, plus the hose, adapter, wrench and pipettes needed for a broad setup.

See it on Amazon

Pros

• Three matched sizes
• Includes changing wrench
• Plastic case with foam template

Cons

• A full kit may be more than needed for one damaged part

The Timbertech ABPST01 is the strongest all-purpose choice when you want several matched airbrush needle and nozzle sizes in one kit. It includes 0.2, 0.3 and 0.5 mm needles and nozzles, so you can choose a finer or broader setup without buying separate size groups.

The airbrush has a 5 ml paint tank, a 2 m fabric hose and an 8 mm, or 1/8 inch, external air connection. The kit also includes an adapter, 4 pipettes, a small wrench and a plastic case with a foam template.

Use the 0.2 mm pair for fine detail, the 0.3 mm pair for general work and the 0.5 mm pair for broader coverage when your paint and airbrush setup allow it. Keep each needle with its matching nozzle during storage.

This is the best choice if you need a replacement set and a usable airbrush setup in the same package. It is less targeted if one compatible airbrush only needs a single replacement part.

2

HUBEST 20Pc Airbrush Cleaning Kit: Best for replacement and cleaning

9.6/10Our score

• 0.2, 0.3 and 0.5 mm replacement sets
• 3 needles, 3 nozzles and 3 nozzle caps
• 5 nylon brushes
• 5 stainless steel picks

HUBEST combines three replacement sizes with brushes, picks and a repair tool for users who want parts and routine maintenance together.

See it on Amazon

Pros

• Three complete size sets
• Cleaning tools included
• Designed for many standard dual-action gravity-feed airbrushes

Cons

• Verify the original nozzle thread size first

HUBEST is the best pick when replacement parts and cleaning tools are equally important. It includes complete 0.2, 0.3 and 0.5 mm sets, with 3 needles, 3 nozzles and 3 nozzle caps.

The kit adds 5 nylon brushes, 5 stainless steel picks and a golden repair tool. Its needles are stainless steel, and its nozzles have a copper-plated finish.

HUBEST is designed for most standard dual-action gravity-feed airbrushes, but you still need to verify that the original nozzle thread size matches. That check matters because a correct diameter alone does not guarantee a physical fit.

Choose the 0.2 mm setup for fine detail, the 0.3 mm setup for general-purpose work and the 0.5 mm setup for background or broad coverage. Keeping the sizes separate in storage helps you reach for the matching needle and nozzle without mixing pairs.

Use the cleaning tools gently so you do not damage the nozzle opening. A light touch with a brush or pick is meant to clear dried paint, not to force a blocked tip back into shape.

This option suits a hobbyist who wants one purchase to cover both a worn part and routine maintenance. It is less direct if your airbrush is a named model with its own matched repair kit.

Check the thread and diameter before fitting, then test with thinned paint at low pressure. A short test spray shows whether the pattern is even before you return to detailed work.

3

Fengda Timbertech Professional Double Action Airbrush BD-130: Best for 0.3 mm general painting

9.4/10Our score

• Mounted 0.3 mm needle and nozzle
• 7 ml gravity-feed cup
• 15 to 50 PSI working pressure
• 1/8 inch connection thread

The BD-130 is a complete airbrush rather than a loose replacement set, with a mounted 0.3 mm pair for general painting and model work.

See it on Amazon

Pros

• 7 ml cup
• Double-action control
• Metal construction

Cons

• Only the mounted 0.3 mm size is specified

The Fengda Timbertech BD-130 is the best option here if you need a complete 0.3 mm airbrush rather than loose replacement parts. Its mounted 0.30 mm needle and nozzle suit general painting, models, craft work and other uses stated for the airbrush.

It has a 7 ml gravity-feed cup, double-action air and paint control, a 1/8 inch connection thread and a stated working pressure of 15 to 50 PSI. The body is metal, and the package includes a plastic dropper and wrench.

For fine lines, the instructions call for close working distance and suitable skill. The spray pattern changes with the distance between the airbrush and the work surface.

Pick the BD-130 when your current tool needs replacement but you would rather move to a complete airbrush. Pick a dedicated replacement kit when your existing body is the right fit and only the needle or nozzle is damaged.

4

Gaahleri Airbrush Seeker: Best for quick size changes

9.2/10Our score

• 0.3 and 0.5 mm needle and nozzle sets
• 6-channel quick-release nozzle
• 1/3 oz flared paint cup
• Dual-action gravity feed

The Seeker suits users who switch between detail and broader coverage and want a quick-release nozzle design for removal and cleaning.

See it on Amazon

Pros

• Two size sets
• Quick-release nozzle
• Ergonomic Calm Island design

Cons

• No 0.2 mm size in the stated set

The Gaahleri Seeker is best for users who switch between 0.3 and 0.5 mm work and want a quick-release nozzle. It includes 0.3 and 0.5 mm needle and nozzle sets in one dual-action gravity-feed airbrush.

Its 6-channel quick-release nozzle is designed for easier removal and cleaning. It also has a 1/3 oz flared paint cup and the Calm Island ergonomic design.

The two sizes cover general detail and broader spray work, but no 0.2 mm option is stated. That makes it less suitable for very fine detail.

Choose the Seeker when easy nozzle access matters and you want two usable sizes in one airbrush. The quick-release design targets simpler maintenance for users who clean after every session.

The ergonomic design aims to reduce finger strain in longer sessions. That suits model work or illustration with controlled trigger use.

The flared cup can make filling and cleaning easier than a narrow cup. Empty and wash it before removing parts for a deeper clean.

If you need only a model-specific replacement, a matched Master kit is more direct. The Seeker makes more sense as a complete airbrush.

Match the size to the task and thin paint to suit it. Keep the unused set clean and protected so switching is easier.

5

Master Airbrush 0.3 mm Needle: Best for Master G-series repair

8.9/10Our score

• 0.3 mm needle, nozzle and nozzle cap
• Fits G22, G23, G24, G25, G26, G34 and G39

This matched three-piece set is the focused choice when a compatible Master G-series airbrush needs its 0.3 mm needle, nozzle and cap replaced together.

See it on Amazon

Pros

• Matched replacement set
• Specific G-series compatibility
• Includes nozzle cap

Cons

• Limited to 0.3 mm

The Master Airbrush 0.3 mm repair kit is the focused choice for compatible G-series airbrushes. It includes a 0.3 mm needle, nozzle and nozzle cap, giving you the complete small set needed for a matched replacement.

Compatibility is stated for the Master G22, G23, G24, G25, G26, G34 and G39 models. Check your airbrush model before ordering because this is not presented as a universal replacement.

A 0.3 mm setup sits between fine-detail and broad-coverage sizes. It can suit general painting when your model is designed for that diameter, but the correct fit comes before the size choice.

Choose this kit when a compatible Master airbrush has a damaged or worn 0.3 mm assembly. It gives you the needle, nozzle and cap together, so the parts can be changed as a matched set.

Choose HUBEST or Uouteo when you need multiple sizes and cleaning tools in the same purchase. A single-size kit is the simpler route when the model and diameter are already known.

Store the replacement as a set and fit it only after the paint path has been cleaned. A clean seat helps the nozzle sit correctly and keeps residue from affecting the first spray.

Test the new parts with thinned paint and a gentle pull on the trigger. An even pattern at a normal working distance suggests the pair is seated well.

Keep the old parts separate so they are not mixed with the new set by mistake. Clear labelling by size avoids fitting a worn part back into the airbrush.

6

Pinkiou Airbrush Kit with Different Nozzle: Best for a multi-use starter set

8.7/10Our score

• 0.2, 0.3 and 0.5 mm needles
• Airbrush hose
• Double-action control
• Includes oil-water separator

Pinkiou gives a new user three needle sizes, a hose and an oil-water separator for different spray patterns and a cleaner air line.

See it on Amazon

Pros

• Three needle sizes
• Hose included
• Oil-water separator included

Cons

• The 0.2 mm needle is in the airbrush while the 0.3 and 0.5 mm needles are in the parcel

The Pinkiou kit suits beginners who want several needle sizes, a hose and an oil-water separator together. It includes 0.2, 0.3 and 0.5 mm needles, with the 0.2 mm needle in the airbrush and the 0.3 and 0.5 mm needles in the parcel.

The kit includes a 1.5 m nylon braided hose, a copper airbrush, stainless steel needles, an oil-water separator and a double-action control. The stated applications include model painting, temporary tattoos, nail design, body painting and cake decoration.

Use the smaller size for fine detail and the larger sizes for wider coverage when the paint is prepared for that setup. Thinning and straining matter more as the diameter gets smaller, because a fine tip is quicker to clog.

Keep the extra needles protected and change them carefully. A needle that is dropped or stored loose can bend, and a bent tip will not give a clean pattern even in a matching nozzle.

This is a practical starter package when you need more than a replacement needle. The hose and separator are part of the setup, so the purchase can cover the air line as well as the spray parts.

For one damaged matched pair in a known Master model, the Master kits are more targeted. A focused kit avoids paying for a hose and separator you may not need.

Change one size at a time and test the pattern before moving to work. Clean the cup and paint path after use, then store each needle with care.

7

Master Airbrush .5mm Needle: Best for Master G-series coverage

8.4/10Our score

• 0.5 mm needle, nozzle and cap kit
• Fits G22, G23, G24, G25, G26, G34 and G39

This set is for a compatible Master G-series airbrush that needs the larger stated size for broader work rather than a fine 0.3 mm setup.

See it on Amazon

Pros

• Complete matched set
• Specific model compatibility
• 0.5 mm size

Cons

• Only fits the stated Master models

The Master Airbrush 0.5 mm kit is the best focused replacement for compatible G-series airbrushes that need the larger stated size. It includes a 0.5 mm needle, nozzle and cap.

The compatible models are G22, G23, G24, G25, G26, G34 and G39. Confirm the model before ordering, since a 0.5 mm diameter does not make this set suitable for every airbrush.

A larger nozzle and needle can support broader coverage than a smaller pair, but your airbrush, paint preparation and working pressure still need to support that setup. Thinned paint that suits a fine tip may be too thin for broad coverage, so adjust the mix for the larger size.

Pick this kit when you already own a compatible Master airbrush and want a complete 0.5 mm replacement assembly. It is a direct repair choice rather than a starter package.

Choose the 0.3 mm Master kit if fine general-purpose work is the better match. The two sizes suit different tasks, and the right one depends on the detail level you need.

Fit the parts as a matched set after cleaning the paint path. A damaged nozzle or bent needle can affect the pattern, so replacing them together reduces the chance of a mismatch.

Store the set apart from smaller sizes to avoid confusion. Clear separation makes it easier to choose the correct diameter for background work or broader areas.

Test with thinned paint at a normal distance before starting on the piece. An even spray confirms that the new assembly is seated and flowing as expected.

8

Actekart Airbrush Nozzles and Bottles Kit: Best for disposable color changes

8.2/10Our score

• 150 disposable nozzles
• 0.2, 0.3 and 0.5 mm sizes
• 3 paint bottles
• 1 spray module

Actekart is aimed at TK-AB0077 and TK-AB0078 users who want many disposable nozzles, three bottles and a spray module for color changes.

See it on Amazon

Pros

• 150 disposable nozzles
• Three sizes
• Storage case included

Cons

• Compatibility is limited to the stated TK models

The Actekart kit suits compatible TK-AB0077 and TK-AB0078 users who want many disposable nozzles. It includes 150 nozzles, with 50 each of 0.2, 0.3 and 0.5 mm.

The package also includes 3 paint bottles, 1 spray module and a sturdy storage case. For compatible Iwata and Paasche setups, compare airbrush bottles.

Its dual-system design is intended to let a TK-AB0077 compressor use the TK-AB0078-style replaceable-needle setup. That aims to simplify switching modes for those stated models.

Compatibility is tied to the stated TK models, so it is less universal than multi-size kits. Verify your equipment before ordering, since a large supply is only useful if it fits.

Choose Actekart when frequent color changes matter more than reusable parts. Pre-installed nozzles on bottles aim for faster switching and less cleaning between colors.

For a standard repair, HUBEST or Uouteo may fit better. Those kits offer reusable needles, nozzles and cleaning tools for airbrushes outside the TK system.

Keep sizes separated in the storage case for easy access. That helps avoid mixing diameters during frequent color changes.

Check the model number and confirm the spray module fits your compressor. That avoids buying many nozzles for the wrong setup.

9

Uouteo 0.2mm: Best for four-size repair запас

7.9/10Our score

• 0.2, 0.3, 0.4 and 0.5 mm needles and nozzles
• 11-piece cleaning kit
• Stainless steel needles
• Pure copper nozzles

Uouteo covers four sizes, including 0.4 mm, and adds cleaning tools for users who want a broad repair kit.

See it on Amazon

Pros

• Four needle and nozzle sizes
• Cleaning tools included
• Copper nozzles

Cons

• Check needle and nozzle diameters before cutting or fitting

Uouteo is the best pick when you want four replacement sizes and a cleaning kit in one package. It includes 0.2, 0.3, 0.4 and 0.5 mm needles and nozzles, with needles about 13 cm long.

The set includes stainless steel needles, pure copper nozzles, a 5-in-1 mini cleaning brush set, a 5-in-1 mini cleaning needle set and a golden needle tool.

Uouteo states that the needle and nozzle should be used in combination. It also warns that the needle diameter and nozzle diameter must match, especially if the needle is cut shorter.

Choose this kit when 0.4 mm is useful to your work or when you want a broad range of sizes. The extra size sits between the usual middle and broad choices, which can help when a project needs a step between them.

Measure and compare your airbrush before fitting because the data does not identify a universal model range. Diameter and length both matter, so a careful check reduces the risk of a poor fit.

The cleaning tools are aimed at routine maintenance rather than force. Use the brush that suits the nozzle size and stop if the tip feels damaged, since pushing through can make the opening wider.

This set suits a user who wants range and maintenance tools together. It is less direct if a named model kit already matches your airbrush exactly.

Store each size as a pair and keep the cleaning tools separate from the parts. Test the fitted pair with thinned paint before detailed work.

How do you choose an airbrush needle and nozzle replacement?

Choose a replacement by matching the airbrush model, nozzle thread and needle-nozzle size. A 0.2 mm pair favors fine detail, 0.3 mm is a flexible middle choice and 0.5 mm supports broader coverage when compatible.

If one part is damaged, replace the needle and nozzle together when possible. A matched pair reduces the chance that a bent needle or incorrect diameter will affect the spray pattern.

For a known Master G22, G23, G24, G25, G26, G34 or G39, the Master 0.3 mm or 0.5 mm kit is the most direct route. For a broader generic setup, HUBEST or Uouteo gives more sizes, but HUBEST specifically requires checking the original nozzle thread.

You can also review the best paint spray gun guide if your project needs wider paint coverage than an airbrush provides. For compressor-side accessories, see the Best Air Compressor Nozzle Attachment guide and the Best Replacement Gauge For Air Compressor guide.

What do different airbrush needle and nozzle sizes do?

A 0.2 mm set suits fine detail, 0.3 mm balances detail and general coverage, and 0.5 mm gives a broader pattern when the airbrush supports it. The best choice depends on the tool and paint.

Use the smallest size only when paint preparation and cleaning support it. A fine tip needs well thinned and strained paint, plus prompt cleaning so residue does not dry inside.

A larger size is more practical for broad backgrounds, while a middle size can reduce part changes during mixed projects. Fewer changes mean less handling of delicate tips.

The 0.4 mm size in some kits sits between middle and broad coverage. It can give more flow than 0.3 mm without moving to 0.5 mm.

Needle length and diameter also matter. Uouteo states about 13 cm length and warns that diameter must match the nozzle, so check measurements before cutting or fitting.

Working distance changes the pattern as much as size does. A larger diameter used close can still give controlled coverage, while a fine size used further away will widen spray.

Match size to paint as well as subject. Thicker paint needs a setup that passes it cleanly, while well thinned paint can suit a smaller tip.

Keep each pair together in storage and cleaning. You can then select by task instead of searching through loose parts.

How should you install and care for replacement parts?

Empty the paint cup before removing parts, then clean residue from the paint path with the correct brush or cleaning tool. Starting with an empty cup prevents paint from spilling or drying while the assembly is open.

Install the matched needle and nozzle carefully, and avoid forcing a needle into a nozzle. Gentle handling protects the tip, since a bent needle or a damaged nozzle opening can affect the spray pattern.

Use the supplied wrench only where the design calls for one. Timbertech includes a small wrench for nozzle changes, while HUBEST and Uouteo include cleaning tools for maintenance.

Check the model and thread before fitting any replacement. A kit made for a named model or a stated system may not fit a different airbrush, even when the diameter looks similar.

After fitting, test with thinned paint at a normal working distance. An even pattern suggests the pair is matched and seated, while an uneven pattern is a sign to stop and check the parts again.

After cleaning, keep needles and nozzles protected from bending or contamination. A case or a divided container keeps fine tips away from tools and other parts.

Store each size as a pair, especially when a kit includes several diameters. Labelled separation makes it easier to choose the right size and avoids mixing a worn part with a new one.

Clean promptly after each session rather than leaving residue to dry. A short routine with the correct brush is easier than clearing a clogged tip later.

Best airbrush needles and nozzles: final verdict

The Timbertech ABPST01 is the best overall choice for airbrush needles and nozzles because it includes matched 0.2, 0.3 and 0.5 mm sizes with useful setup parts. That range covers detail, general work and broader coverage without buying separate size groups.

Choose HUBEST if you also need cleaning tools, Master if you need a compatible G-series repair, and Actekart for TK disposable nozzles. Each of those options answers a different situation, so the right pick depends on your airbrush and your usual routine.

A complete airbrush such as the BD-130 or the Gaahleri Seeker suits a user who needs a tool rather than loose parts. A reusable replacement set suits a user whose airbrush body is still sound, while a disposable supply suits frequent color changes.

For a wider paint setup after replacing parts, compare our best airbrush paint kit guide. Paint preparation, thinning and straining all affect how well a chosen size will spray.

Match the needle and nozzle size to your airbrush before ordering, then keep the pair clean and protected between projects. Checking the model, thread and diameter takes a few minutes and can save a wasted purchase.

Store each size as a matched pair and handle fine tips with care. That simple habit helps the next session start with an even pattern instead of a search through loose parts.

Our top 3 picks at a glance

1. 1
   Best for complete size changes

   Timbertech® ABPST01 Airbrush Kit

   9.7/10 our score

   See it on Amazon
2. 2
   Best for replacement and cleaning

   HUBEST 20Pc Airbrush Cleaning Kit

   9.6/10 our score

   See it on Amazon
3. 3
   Best for 0.3 mm general painting

   Fengda Timbertech Professional Double Action Airbrush BD-130

   9.4/10 our score

   See it on Amazon

Frequently asked questions

Should you replace an airbrush needle and nozzle together?

Yes, replacing an airbrush needle and nozzle together is usually the safer choice when either part is bent, damaged or mismatched. The pair should share the same size, such as 0.2, 0.3 or 0.5 mm.

Check your airbrush model and thread size before ordering.

What size airbrush needle and nozzle is best?

A 0.2 mm airbrush needle and nozzle suits fine detail, a 0.3 mm pair is a flexible general-purpose choice, and a 0.5 mm pair supports broader coverage. Your paint type, thinning and airbrush model also matter, so match the replacement to the tool.

Can you use any airbrush nozzle with any needle?

No. An airbrush needle and nozzle should match in size and fit the airbrush body.

Master’s 0.3 mm and 0.5 mm kits fit stated G-series models, while Actekart parts are for TK-AB0077 and TK-AB0078.

Verify compatibility before fitting.

How do you prevent a replacement nozzle from clogging?

Clean the paint path after use, remove residue before it dries and use the correct cleaning tool carefully. HUBEST and Uouteo include brushes and picks, while the Gaahleri Seeker uses a quick-release nozzle design intended to simplify removal and cleaning.