9 Best LVLP Spray Guns and Kits (November 2026)
The best LVLP spray guns and kits include the AEROPRO Tools R500 LVLP Air Spray Gun for most DIY paint jobs, the InoKraft D1 LVLP Air Spray Gun Premium for a complete starter setup, and the Tilswall Pinto LVLP Spray Gun for Automotive for a stainless steel flow path.
On this page (6 sections)
The AEROPRO Tools R500 is the best LVLP spray gun for most DIY painters because it combines 3.0–3.9 CFM air use with 3 nozzle sizes and an included regulator. That mix suits people who want one gun for car panels, furniture, cabinets, varnish and top coats without buying several separate tools at the start.
Choose InoKraft for a fuller starter kit, Tilswall Pinto for a stainless steel flow path, or BENTOHKLE for disposable cups. Each route solves a different problem, so your compressor, coating type and cleanup preference should guide the choice more than brand preference.
LVLP means low volume, low pressure. These guns are worth considering when your compressor has limited air capacity, but the compressor still needs to deliver enough CFM for steady spraying.
A gun that runs short on air can lose pattern control as pressure falls. That matters most during long passes on a door, panel or cabinet, where a changing spray can show up as uneven coverage.
Tank size alone is not a reliable guide. Check the delivered CFM at the pressure you plan to use, then confirm that the regulator range and hose fittings suit your setup.
For a broader introduction, use this best paint spray gun guide. If you are deciding between paint-gun types, our guide on how to set up an HVLP spray gun covers the related setup steps.
Start with the nozzle that matches your coating, then test the fan on cardboard. Small pressure and fluid changes are easier to judge there than on the finished piece.
Our picks at a glance
-
1
Best for most DIY paint jobsAEROPRO Tools R500 LVLP Air Spray Gun
9.7/10 our score
See it on Amazon -
2
Best for a complete starter setupInoKraft D1 LVLP Air Spray Gun Premium
9.5/10 our score
See it on Amazon -
3
Best for a stainless steel flow pathTilswall Pinto LVLP Spray Gun for Automotive
9.1/10 our score
See it on Amazon
- 4
Check itBENTOHKLE R500 LVLP Air Spray Gun
Best for disposable cup cleanup - 5
Check itInoKraft D1 LVLP Spray Gun Kit
Best for disposable paint cups - 6
Best for adjustable spray widthCheck it - 7
Check itBENTOHKLE R500 LVLP Air Spray Gun
Best for thicker coatings - 8
Check itTilswall Pinto LVLP Spray Gun for Car
Best for a lightweight basic kit - 9
Check itAEROPRO Tools R500 LVLP Double Air Spray
Best for separate base and top coats
How we chose the best LVLP spray gun picks
The best LVLP spray gun for your project depends on air demand, nozzle range, included controls and coating type. We compared those details across product information for jobs such as automotive panels, furniture, cabinets and DIY touch-ups.
We gave extra weight to clearly stated lower air use because this roundup focuses on limited compressor capacity. A stated figure lets you compare a gun with your compressor rating, while a missing figure leaves a key question unanswered.
Regulators, oil-water separators, filters, extra cups and multiple guns also mattered, since those parts change the real cost of getting started. Nozzle range mattered too, with 1.3 mm for thinner materials, 1.5 mm and 1.7 mm for medium and thicker coatings, and 2.0 mm for high-build primer.
Cup format affected cleanup, as disposable liners speed color changes but create repeat purchases. Materials such as stainless steel flow paths, Teflon-coated bodies and forged aluminum also affect cleaning and corrosion resistance.
Marked scales, guides and clear controls help beginners make repeatable adjustments. Our score is a shortlisting guide, not a substitute for matching air supply, fittings and paint type to your workshop.
| Product | Best for | Air use | Nozzles | Cup | Our score |
|---|---|---|---|---|---|
| AEROPRO Tools R500 LVLP Air Spray Gun | most DIY paint jobs | 3.0–3.9 CFM | 1.3, 1.5 and 1.7 mm | 600 cc | 9.7 |
| InoKraft D1 LVLP Air Spray Gun Premium | a complete starter setup | 1.3, 1.5 and 1.7 mm | 600 ml | 9.5 | |
| Tilswall Pinto LVLP Spray Gun for Automotive | a stainless steel flow path | 1.3, 1.5 and 1.7 mm | 600 ml | 9.1 | |
| BENTOHKLE R500 LVLP Air Spray Gun | disposable cup cleanup | 3.0–3.9 CFM | 8.9 | ||
| InoKraft D1 LVLP Spray Gun Kit | disposable paint cups | 1.3, 1.5 and 1.7 mm | 650 ml | 8.8 | |
| SICOPRO LVLP Spray Gun | adjustable spray width | 600 ml | 8.7 | ||
| BENTOHKLE R500 LVLP Air Spray Gun | thicker coatings | 3.0–3.9 CFM | 1.3, 1.5, 1.7 and 2.0 mm | 650 ml | 8.6 |
| Tilswall Pinto LVLP Spray Gun for Car | a lightweight basic kit | 1.3, 1.5 and 1.7 mm | 600 ml | 8.2 | |
| AEROPRO Tools R500 LVLP Double Air Spray | separate base and top coats | 3.0–3.9 CFM | 1.4 and 1.7 mm guns | 1000 cc | 8.0 |
Best LVLP spray guns and kits compared
The AEROPRO R500 leads this group for balanced air use, nozzle choice and setup. The InoKraft Premium is the better fit if you want more accessories in the box, while the Tilswall Pinto Premium focuses on its stainless steel flow path and wide fan.
AEROPRO Tools R500 LVLP Air Spray Gun: Best for most DIY paint jobs
- 3.0–3.9 CFM air consumption
- 1.3, 1.5 and 1.7 mm nozzles
- 600 cc gravity-feed cup
- Two-stage trigger
The R500 balances lower air use, useful nozzle choices and a straightforward setup. It fits automotive painting, furniture, cabinets, varnish and top coats.
Pros
- Low stated air consumption
- Three nozzle sizes
- Air regulator included
Cons
- Single gun rather than a larger accessory kit
The AEROPRO Tools R500 is the most balanced choice for general DIY spraying. Its stated 3.0–3.9 CFM air consumption makes it a strong match for buyers who are watching compressor capacity.
The gun includes 1.3 mm, 1.5 mm and 1.7 mm nozzles. The product guidance matches those sizes to lower-viscosity basecoats and clearcoats, medium-viscosity primers and top coats, and higher-viscosity or high-solids coatings.
A two-stage trigger separates dust cleaning from paint delivery. For cleanup supplies, compare spray gun cleaning kits.
The 600 cc gravity-feed cup and air regulator are included, and the Teflon-coated body is designed to resist paint buildup.
Choose this R500 when you want one spray gun for automotive painting, furniture, cabinets, varnish and top coats. For practical spray-gun setup guidance, see DeVilbiss spray gun guide.
It is the best all-around starting point in this group for a smaller compressor setup.
InoKraft D1 LVLP Air Spray Gun Premium: Best for a complete starter setup
- Pressure regulator and oil-water separator
- 1.3, 1.5 and 1.7 mm nozzle sets
- 600 cc paint cup
- Cleaning kit and storage box
The D1 Premium includes the air-control and cleaning accessories needed for a more complete start. Its marked controls and guides also make setup easier to follow.
Pros
- Broad accessory package
- Oil-water separator included
- 3M paint cup adaptor included
Cons
- The product guidance recommends a compressor with 9.7–10.2 CFM air consumption
The InoKraft D1 Premium is the best LVLP spray gun kit when you want the air-control parts and cleaning tools included. After choosing a gun, use this HVLP spray gun storage guide to protect it between projects.
The package has a pressure regulator, oil-water separator, air hose connector, filters, wrench, cleaning kit and storage box.
Its 1.3 mm, 1.5 mm and 1.7 mm nozzle set covers common paint thicknesses. Marked scales on the gun help you adjust paint flow and spray settings, while the quick-start guide and manual support setup.
The kit also includes a 3M paint cup adaptor. InoKraft gives a recommended compressor range of 2.0–3.5 bar and 9.7–10.2 CFM air consumption, so check your compressor carefully before choosing this model for low-capacity work.
Pick it when a complete start-up package matters more than the lowest stated air requirement. For another kit comparison, see our best HVLP spray gun kit guide.
Tilswall Pinto LVLP Spray Gun for Automotive: Best for a stainless steel flow path
- Stainless steel flow path
- 1.3, 1.5 and 1.7 mm nozzles
- 28 cm+ spray fan
- Air regulator and oil-water separator
The Pinto Premium Kit focuses on a stainless steel paint flow path, a wide spray fan and a broad accessory package. It suits automotive panels, metal parts and cabinets.
Pros
- Stainless steel flow path
- Wide stated fan
- Cleaning and air-control accessories
Cons
- Compressor requirements need to match your setup
The Tilswall Pinto Premium is the strongest choice here for a stainless steel paint flow path and a broad spray fan. Its package includes 1.3 mm, 1.5 mm and 1.7 mm nozzles, an air regulator, an oil-water separator and cleaning tools.
Tilswall describes a 28 cm+ spray fan, which can help cover doors, cabinets and vehicle panels in fewer passes. A wide fan can improve speed on flat areas, but it also needs steady air and careful overlap to avoid dry edges.
The pure copper air cap, stainless steel nozzle and fluid needle are designed for controlled atomization. That combination is aimed at a smooth, even finish on automotive work, metal parts and custom cabinetry.
The 600 ml cup gives you a familiar gravity-feed format for automotive, metal and cabinet work. It is large enough for many panels and furniture pieces, though very large areas may still need refills during the job.
The gun supports a maximum pressure of 70 psi, but your working setting should follow the coating and setup instructions. Higher pressure is not better by default, since it can increase overspray and make the fan harder to control.
Cleaning deserves attention with any spray gun, and this kit includes tools for that task. Rinse and clear the paint passages after use so residue does not harden in the needle or nozzle.
Choose this kit if material construction and wide coverage are high on your list. Confirm the compressor match before buying because a wide fan can still demand steady air delivery.
BENTOHKLE R500 LVLP Air Spray Gun: Best for disposable cup cleanup
- 3.0–3.9 CFM air consumption
- 10 disposable paint cups
- 1.3, 1.5 and 1.7 mm nozzles
- Oil-water separator included
This R500 kit pairs low stated air use with disposable cup liners and the main air-control accessories. It is a practical choice when fast color changes matter.
Pros
- Disposable cup system
- Three nozzle sizes
- Pressure regulator included
Cons
- The product data does not specify a cup volume for the disposable system
The BENTOHKLE R500 is the best LVLP spray gun kit for buyers who want disposable cup cleanup. It includes 10 disposable paint cups, a pressure regulator, an oil-water separator, cleaning tools and 1.3 mm, 1.5 mm and 1.7 mm nozzles.
Its stated air consumption is 3.0–3.9 CFM, with a 180–280 mm pattern width. That low air figure is a key reason to consider it for a smaller compressor, provided your machine can sustain the required output.
The two-stage trigger gives one setting for dust cleaning and another for painting. That helps you blow dust from the surface before the first coat without wasting paint during the cleaning pass.
Three adjustment knobs control the spray setup, including pattern and fluid delivery. Make one change at a time and test on cardboard so you can see which control caused the difference.
This kit suits automotive, furniture and home painting projects. Disposable liners can make color changes simpler because you can replace the liner instead of cleaning a reusable cup after every color.
The tradeoff is that liners and lids are consumables. Keep track of compatible replacements before you rely on the system for frequent work.
Choose it when cleanup time matters as much as spray control. Check what replacement liners fit the cup system before you commit to using disposables for frequent projects.
InoKraft D1 LVLP Spray Gun Kit: Best for disposable paint cups
- 22 oz disposable paint cups
- 1.3, 1.5 and 1.7 mm nozzle support
- 650 ml tank volume
- Accessories included
The InoKraft D1 kit adds disposable paint cups to the D1 spray gun format. It suits DIY painters who want to reduce cup-cleaning work between projects.
Pros
- Disposable cup package
- Three nozzle sizes
- Paint accessories included
Cons
- The product data gives fewer accessory details than the Premium Kit
The InoKraft D1 kit is a good choice when disposable paint cups are the main reason you are shopping for an LVLP setup. It includes the D1 spray gun, paint cups and accessories, with support for 1.3 mm, 1.5 mm and 1.7 mm nozzles.
The stated tank volume is 650 ml, giving it slightly more capacity than several 600 ml options here. That extra room can reduce refills on larger furniture or vehicle parts, while still keeping the gun manageable in hand.
The kit is intended for automotive, house and DIY painting, but paint preparation and compressor capacity still control the result. The right nozzle and pressure for a thin clearcoat will not be the same as the settings for a thicker primer.
Disposable cups suit people who change colors often or want a faster end of session cleanup. You still need to clean the gun passages, so the saving is mainly in the cup rather than in the whole tool.
Compared with the D1 Premium, this package gives you fewer listed accessory details. It makes more sense when you already have an air regulator and moisture-control parts, or when the disposable cup format is your priority.
Check the exact cup and liner compatibility before ordering replacements. A system works best when the cup, lid and adapter all match the gun.
Pick this version for a simpler D1 package with disposable cups. Choose the Premium instead if you need the regulator, separator, filters and storage box included.
SICOPRO LVLP Spray Gun: Best for adjustable spray width
- Spray width up to 280 mm
- 190-micron paint filters
- Adjustable paint and spray controls
- Teflon-treated body
SICOPRO combines adjustable spray controls with 10 nylon mesh filters. The filter pack helps remove impurities before paint reaches the nozzle.
Pros
- Filters included
- Wide adjustable spray pattern
- Controls have marked scales
Cons
- Air consumption is not specified in the product data
The SICOPRO LVLP Spray Gun is the best choice here for adjustable spray width and included paint filters. Its spray width adjusts up to 280 mm, and the package includes 10 190-micron nylon mesh filters.
The filters are designed to remove impurities before paint reaches the nozzle. That can help protect a fine spray tip, especially when paint has been sitting open or has picked up dust during mixing.
Marked adjustment scales help control paint volume and spray width, which can be useful when you are learning how small changes affect coverage. A narrower fan may suit small panels, while a wider fan can speed up flat furniture surfaces.
The gun has a 600 ml tank and a stated maximum pressure of 29 psi. Treat that figure as a limit for the setup, not as a target, and set working pressure according to the coating and gun instructions.
SICOPRO describes it as suitable for automotive painting, furniture refinishing and DIY projects, but the product data does not state an air-consumption figure. You should ask for or check the current requirement before pairing it with a small compressor.
The Teflon-treated body is intended to resist buildup and make cleaning easier. It does not remove the need to flush the needle, nozzle and cup after each session.
Choose it when filtration and pattern adjustment matter more than a published CFM number. Compare your compressor's output with the seller's current requirements before ordering.
BENTOHKLE R500 LVLP Air Spray Gun: Best for thicker coatings
- Four nozzle sizes from 1.3 to 2.0 mm
- 3.0–3.9 CFM air consumption
- 10 disposable cup liners and lids
- Pressure gauge and water-oil separator
The four-nozzle R500 kit gives you a 2.0 mm option for high-build primer and thicker coatings. It also includes disposable cups, a gauge and moisture control.
Pros
- Four nozzle sizes
- Disposable cup system
- Pressure gauge included
Cons
- The larger nozzle does not remove the need to prepare paint correctly
The BENTOHKLE R500 with 4 nozzles is the best LVLP spray gun kit for buyers who need a larger nozzle option. It includes 1.3 mm, 1.5 mm, 1.7 mm and 2.0 mm nozzles, with the 2.0 mm size intended for high-build primer.
The kit also includes a 650 ml cup, 10 disposable liners and lids, a pressure gauge, a water-oil separator, a cleaning kit and sealing tape. Its stated air consumption remains 3.0–3.9 CFM.
The wider nozzle range makes this kit more flexible for automotive refinishing, furniture, wall painting and other projects. You can move from a fine clearcoat setup to a thicker primer setup without buying another gun.
A larger nozzle does not mean you can skip paint preparation. Thicker coatings may still need correct thinning, straining and mixing, and the coating label should guide those steps.
Disposable liners help with color changes and reduce cup washing. The gauge and separator support pressure control and cleaner air, which can make results more repeatable across sessions.
Keep the spare nozzles labeled or stored by size so setup stays fast. Changing nozzles mid project is easier when the next size is already clean and ready.
Pick this model if your projects include thicker materials. Choose the simpler R500 if you mainly spray basecoat, clearcoat, primer and top coat.
Tilswall Pinto LVLP Spray Gun for Car: Best for a lightweight basic kit
- Stainless steel flow path
- 350 g stated weight
- 1.3, 1.5 and 1.7 mm nozzles
- 600 ml paint cup
The basic Pinto kit keeps the stainless steel flow path and three nozzle sizes while using a simpler package. Its stated 350 g weight may appeal to buyers planning longer spray sessions.
Pros
- Light stated weight
- Stainless steel flow path
- Three nozzle sizes
Cons
- The basic kit has fewer listed accessories than the Premium Kit
The basic Tilswall Pinto is the best lightweight LVLP spray gun kit in this group. Its stated weight is 350 g, and it includes a 600 ml paint cup, cleaning kit, pure copper air cap, stainless steel nozzle and stainless steel top pin.
The stainless steel flow path is the main reason to choose it. That construction is intended to resist corrosion and help the paint passages stay clean during repeated use.
The 1.3 mm, 1.5 mm and 1.7 mm nozzle options cover common automotive and DIY coating needs. Match the size to viscosity rather than forcing one nozzle to handle every material.
A lighter gun can be easier to hold during long passes on doors, cabinets and panels. Less fatigue can help you keep the gun square to the surface and maintain even overlap.
This version keeps the core Pinto design while offering fewer listed accessories than the Premium Kit. That makes it a better fit if you already have the regulator, separator or other air-line parts you need.
The Teflon-coated surface and stainless steel path should still be cleaned after each use. Dried paint in the cap or needle can disturb the fan even when the body looks clean.
Choose it for a lighter basic package and a stainless steel flow path. If you need a wider spray fan and more setup accessories, move up to the Pinto Premium.
AEROPRO Tools R500 LVLP Double Air Spray: Best for separate base and top coats
- Two 1.4 and 1.7 mm spray guns
- 1000 cc aluminum cup
- 3.0–3.9 CFM air consumption
- Regulator and water-oil separator
The double-gun kit lets you keep 1.4 mm and 1.7 mm setups available without changing the nozzle. The larger cup suits broader paint jobs.
Pros
- Two spray guns
- Large 1000 cc cup
- Air-control accessories included
Cons
- Less flexible nozzle range than the single-gun R500 picks
The AEROPRO Tools R500 Double Air Spray kit is best for keeping separate setups for base and top coats. It includes two A610 guns with 1.4 mm and 1.7 mm nozzles, so you can switch guns instead of changing one nozzle between materials.
The kit has a 1000 cc aluminum cup, an air regulator, a water-oil separator and paper paint strainers. Its stated air consumption is 3.0–3.9 CFM, with a stated spray width up to 280 mm.
The larger cup suits broader projects, while the two-gun layout can reduce setup changes. The tradeoff is a narrower nozzle range than the single-gun R500 models, which include 1.3 mm and sometimes 2.0 mm options.
Choose this kit when you want separate guns for two common coating steps. For a compressor-focused comparison, see our guide to the best air compressor for spray gun.
How much compressor capacity does an LVLP spray gun need?
The required compressor capacity depends on the spray gun, coating and pressure setting, so compare delivered CFM rather than tank size alone. The AEROPRO and BENTOHKLE R500 models state 3.0–3.9 CFM, while InoKraft gives a higher 9.7–10.2 CFM recommendation for the D1.
A larger tank can provide a buffer between compressor cycles, but it does not increase the compressor's sustained output. If the compressor cannot keep up, the spray pattern may change as pressure drops.
Check the compressor's delivered CFM at the pressure you plan to use. You should also confirm hose fittings, regulator range and moisture control before putting paint into the gun.
Our best budget air compressor guide can help if you are building a complete setup. For very small jobs, compare the equipment needs with our guide to the best mini spray gun with compressor.
Which LVLP nozzle size should you choose?
Choose the nozzle by coating thickness: 1.3 mm for lower-viscosity basecoats and clearcoats, 1.5 mm for medium-viscosity primers and top coats, and 1.7 mm for thicker materials. The BENTOHKLE 4-nozzle R500 adds 2.0 mm for high-build primer.
The nozzle controls how much material passes through the gun in one pass. Too small can struggle with thicker paint, while too large can lay down more than a thin coat needs.
Start with coating instructions and your gun guidance. Some kits list the expected material for each nozzle, which is safer than guessing from the paint name alone.
A larger nozzle does not guarantee a better finish. Paint preparation, pressure and movement still determine the result.
If the fan looks dry or paint struggles, check thinning and straining before changing nozzles. Wrong viscosity can cause problems no nozzle size will fully fix.
Test each setup on cardboard or a masked panel first. Check fan shape, coverage and how much paint lands in the center versus the edges.
Keep the gun perpendicular to the surface and change one control at a time. Note the nozzle, pressure and fluid settings that work, since those notes reduce trial and error next time.
For touch-ups, a smaller nozzle and narrower fan give better control. For broad flat panels, a wider fan saves time when overlap stays consistent.
How do you prevent moisture and uneven spray?
Use an oil-water separator where instructions recommend it, keep air hose and fittings sealed, and strain paint before it reaches the gun. InoKraft, Tilswall and BENTOHKLE include moisture-control parts in several kits.
Moisture in the air line can disturb atomization and leave flaws. A separator helps before air reaches the gun, but works best when the compressor tank is drained and the hose is clean.
Check fittings for leaks before mixing paint. A small leak can steal pressure, change the fan and waste air a small compressor cannot spare.
Clean the nozzle, needle and cup after each project. A Teflon-coated body can reduce buildup, but it does not remove the need to clean paint passages.
Use supplied cleaning tools and follow solvent guidance for your coating type. Let parts dry fully before storage so residue does not harden inside.
Keep spray distance and movement consistent. Too much pressure creates overspray, while too little reduces atomization and coverage.
Maintain steady speed and keep the gun parallel to the surface. Fanning or changing distance mid pass can create stripes, dry spots and heavier edges.
Test pressure changes on cardboard before returning to the workpiece. Store the gun with an empty cup and clean passages to protect the next finish.
Which is the best LVLP spray gun for your project?
Pick the AEROPRO Tools R500 if you want the best balance of 3.0–3.9 CFM air use, 3 nozzle sizes and simple controls. It suits general DIY work where one gun must cover automotive painting, furniture, cabinets, varnish and top coats.
Pick the InoKraft D1 Premium if you want the fullest starter package with a regulator, separator, filters and cleaning tools. Confirm the recommended compressor output before choosing it for low capacity work.
Choose the Tilswall Pinto Premium for its stainless steel flow path and wide stated fan. It fits when material construction, wide coverage and air control parts matter most.
Choose the BENTOHKLE R500 with 4 nozzles when thicker coatings and a 2.0 mm option matter most. The extra nozzle supports high-build primer, while disposable liners help with faster cleanup.
If disposable cups are your main priority, compare the BENTOHKLE kit with the InoKraft D1 kit that uses 650 ml disposable cups. Check liner availability and compatibility before relying on them for frequent work.
If you already own a regulator and separator, a basic kit may be enough. The Tilswall Pinto basic package keeps the stainless steel path and three nozzles with fewer listed accessories.
Before you order, match stated air needs to your compressor delivered CFM, then confirm fittings, paint type and cleanup method. Test the pattern, adjust one control at a time and clean the gun after every session.
Our top 3 picks at a glance
-
1
Best for most DIY paint jobs
AEROPRO Tools R500 LVLP Air Spray Gun
9.7/10 our score
See it on Amazon -
2
Best for a complete starter setup
InoKraft D1 LVLP Air Spray Gun Premium
9.5/10 our score
See it on Amazon -
3
Best for a stainless steel flow path
Tilswall Pinto LVLP Spray Gun for Automotive
9.1/10 our score
See it on Amazon
Frequently asked questions
What is the best LVLP spray gun for a small compressor?
The AEROPRO Tools R500 is the strongest starting point when your compressor has limited capacity because its stated air consumption is 3.0–3.9 CFM. SICOPRO also describes its gun as suitable for many small to medium compressors, but you still need to compare the gun's requirements with your compressor's delivered CFM.
What is the difference between an LVLP spray gun and an HVLP gun?
An LVLP spray gun is designed to atomize paint with lower air volume and lower pressure than many HVLP setups. That can suit a smaller compressor, but the gun still needs enough delivered CFM to maintain its spray pattern.
Nozzle size, paint thickness and pressure settings also affect the result.
Is the R500 LVLP spray gun good for beginners?
The R500 format can suit beginners because the AEROPRO version has a two-stage trigger, three nozzle sizes and an air regulator. The BENTOHKLE versions add either disposable cups or a fourth 2.0 mm nozzle.
Start with the correct paint preparation and test the pattern before spraying the workpiece.
What nozzle size should you use with an LVLP spray gun?
Use 1.3 mm for lower-viscosity basecoats and clearcoats, 1.5 mm for medium-viscosity primers and top coats, and 1.7 mm for thicker coatings when the gun supports those sizes. A 2.0 mm nozzle can help with high-build primer, as shown by the BENTOHKLE R500 kit.
Do LVLP spray guns need an oil-water separator?
An oil-water separator helps remove moisture and impurities from compressed air before it reaches the paint. The InoKraft Premium, Tilswall Premium and both BENTOHKLE kits include one.
It is useful when clean, consistent air matters, but confirm the fittings and compressor setup before spraying.
