9 Best Paint Spray Gun Nozzle Kits (November 2026)
The best paint spray gun nozzle kits include the SRQLNTT 819 HVLP Air Spray Gun Kits for all-around HVLP coverage, the Javneo Pressure Washer Gun and Hose Kit for pressure washer tip changes, and the Hotorda HVLP Spray Gun with Replaceable 1.4mm for replaceable HVLP nozzles.
On this page (3 sections)
The best spray gun nozzle kit for most DIY painters is the SRQLNTT 819 HVLP Air Spray Gun Kits, with 1.3, 1.7 and 2.0 mm nozzles for different coatings. Choose Hotorda for replaceable HVLP parts, SICOPRO for airless tips, or BEETRO for a model-specific 1.2 mm replacement.
A nozzle kit is useful only when the nozzle, needle, air cap and gun body work together. Check the gun model first, then match the opening size to the coating and finish you want.
If you still need the gun itself, start with our best paint spray gun guide. Your nozzle choice also depends on air supply, hose setup and moisture control, so review the best air compressor for spray gun before buying a complete system.
Our score weighs specs, features and buyer feedback against what you're shopping for. The picks are ordered from highest score to lowest.
Our picks at a glance
-
1
Best for all-around HVLP coverageSRQLNTT 819 HVLP Air Spray Gun Kits
9.6/10 our score
See it on Amazon -
2
Best for pressure washer tip changesJavneo Pressure Washer Gun and Hose Kit
9.4/10 our score
See it on Amazon -
3
Best for replaceable HVLP nozzlesHotorda HVLP Spray Gun with Replaceable 1.4mm
9.2/10 our score
See it on Amazon
- 4
Check itSICOPRO Airless Paint Sprayer Gun Kit
Best for airless reversible tips - 5
Check itBENTOHKLE HVLP Spray Gun Kit with 1.4/1.7/2.0/2.5mm
Best for four-size HVLP matching - 6
Check itGregYoung 23 Pcs 3600PSI Paint Sprayer Gun
Best for airless accessories - 7
Check itBENTOHKLE 819 HVLP Air Spray Gun Kit
Best for HVLP control knobs - 8
Check itBEETRO 1.2mm Nozzle Kit Stainless Steel
Best for BEETRO TC0555 replacement - 9
Check itVEVOR 3-Piece Air Spray Gun Kit
Best for three-cup coating changes
Best spray gun nozzle kit picks for different jobs
The best spray gun nozzle kit depends on whether you need a broad HVLP range, a model-specific replacement or an airless tip set. The top pick offers the most balanced combination of sizes and included controls.
SRQLNTT 819 HVLP Air Spray Gun Kits: Best for all-around HVLP coverage
- 1.3, 1.7 and 2.0 mm nozzles
- 600 ml paint cup
- Air regulator and oil-water separator
- 2.0–3.5 bar working pressure
Three nozzle sizes cover common automotive, wall and touch-up work. The kit also includes an air regulator, oil-water separator and 600 ml cup.
Pros
- Three useful nozzle sizes
- Air regulator and separator included
- Adjustable fluid, pattern and air controls
Cons
- Disposable cup design may not suit every painter
- Coating and setup still need adjustment
The SRQLNTT 819 is the strongest all-around choice because its 1.3, 1.7 and 2.0 mm nozzle sizes cover several common painting steps. Smaller openings can suit finer work, while the larger sizes may be more useful for heavier coatings when the material instructions allow it.
The kit includes a 600 ml cup, air pressure gauge and oil-water separator. Its working pressure is 2.0–3.5 bar, and the stated air use is 3.0–3.9 cfm.
Three adjustment controls handle fluid volume, fan width and airflow. That gives you more ways to tune the spray pattern after choosing the nozzle.
The aluminum alloy body has a copper atomization cap and stainless steel nozzle needle. SRQLNTT also describes a Teflon-coated surface treatment and a disposable paint cup design.
Pick this kit when you want one HVLP setup for primer, clear coat, touch-up and general DIY painting. Confirm your compressor can supply the required air volume before ordering.
Javneo Pressure Washer Gun and Hose Kit: Best for pressure washer tip changes
- Five nozzle tips
- 25 ft hose
- 9, 24 and 40 in wand options
- 3600 PSI hose rating
This is a pressure washer gun and hose set rather than a paint gun. Its five tips and three wand lengths fit cleaning tasks where quick nozzle changes matter.
Pros
- Five interchangeable tips
- Three wand lengths
- 25 ft flexible hose
Cons
- Not for garden hoses or standard faucets
- Not an HVLP paint nozzle kit
The Javneo kit is different from the other picks because it is made for a pressure washer, not an HVLP paint gun. It includes five nozzle tips, a 25 ft hose and three wand lengths of 9, 24 and 40 inches.
Its hose is rated for 3600 PSI and up to 8 GPM, while the gun supports up to 5000 PSI. The M22-14mm inlet and 1/4-inch quick-connect outlet help with compatible pressure washer accessories.
Choose this set for changing cleaning spray patterns, reaching gutters or washing vehicles. It must connect to a pressure washer and is not compatible with a garden hose or standard faucet.
For paint work, choose one of the HVLP or airless kits below instead. For a related setup, our guide to the best HVLP spray gun hose covers hose choices for air-powered paint guns.
Hotorda HVLP Spray Gun with Replaceable 1.4mm: Best for replaceable HVLP nozzles
- 1.4, 1.7 and 2.0 mm nozzle and needle caps
- 600 ml cup
- Stainless steel nozzle parts
- Gravity feed design
Three replaceable nozzle and needle caps give this HVLP gun a useful range for primer, furniture, walls and base coatings. The gravity feed cup holds 600 ml.
Pros
- Three replaceable nozzle sizes
- Stainless steel nozzle parts
- Suitable for several coating types
Cons
- Nozzle fit is tied to the H-827 gun
- Paint may need dilution
Hotorda is a good fit when you want replaceable HVLP spray gun nozzles in three common sizes. The kit includes 1.4, 1.7 and 2.0 mm nozzle, needle and cap sets, plus a 600 ml gravity-feed cup.
The stainless steel nozzle parts are intended for work such as car primer, furniture, walls, art projects and base coatings. The gravity-feed design places the cup above the gun and can reduce leftover material in the cup.
Hotorda lists a maximum pressure of 58 PSI. Its instructions also call for testing and adjusting with water before use and thinning the coating according to the coating maker's directions.
Choose Hotorda when your priority is a replaceable nozzle set for one HVLP gun. Match the replacement parts to the H-827 model before ordering.
SICOPRO Airless Paint Sprayer Gun Kit: Best for airless reversible tips
- 211, 313, 415, 517 and 623 tips
- 3600 PSI rating
- Reversible clog-clearing design
- Filters, extension pole and nozzle seat
Five reversible tips cover fine finishes through heavier coatings on compatible airless sprayers. A 180-degree tip rotation helps clear a clog.
Pros
- Five airless tip sizes
- Reversible tips for clogs
- Extension pole and filters included
Cons
- For airless sprayers, not HVLP guns
- Compatibility should be checked before ordering
SICOPRO is the best match for airless spray gun tips rather than HVLP nozzle assemblies. Its five reversible tips are sized 211, 313, 415, 517 and 623 for different spraying needs.
The tips use 304 stainless steel and tungsten carbide, and the kit includes filters, an extension pole, nozzle seat, spray head guard and spray guide tools. The set is rated for 3600 PSI.
A reversible tip can help clear a clog. Turn it 180 degrees, pull the trigger to clear the blockage, then return it to the spray position after following safe pressure-release steps for your sprayer.
Choose this kit for compatible airless sprayers and heavier coating workflows. It is not a direct replacement for the nozzle, needle and air-cap assembly used by an HVLP gun.
BENTOHKLE HVLP Spray Gun Kit with 1.4/1.7/2.0/2.5mm: Best for four-size HVLP matching
- 1.4, 1.7, 2.0 and 2.5 mm nozzles
- 600 ml cup
- Aluminum alloy body
- Stainless steel nozzle
Four nozzle sizes make this kit useful when you switch between thinner finishes and heavier coatings. Its H2008 body uses aluminum alloy with a stainless steel nozzle.
Pros
- Four nozzle options
- Good range for coating changes
- Cleaning kit included
Cons
- Nozzle sizes fit the H2008 system
- The largest nozzle still needs suitable material
The BENTOHKLE H2008 kit gives you the widest HVLP size range here, with 1.4, 1.7, 2.0 and 2.5 mm nozzles. That makes it useful when you move between finer finishes and heavier materials.
The kit uses an aluminum alloy body, stainless steel nozzle and 600 ml cup. The maker describes uses across metal, wood, plastic, walls, automotive painting and furniture refinishing.
Separate controls adjust paint amount and spray width. The kit also includes a cleaning set, which supports routine care after each coating change.
For dedicated cleanup tools, see spray gun cleaning kits.
Pick it when four nozzle sizes matter more than a compact replacement set. The nozzles are part of the H2008 system, so confirm the model before buying spare parts.
GregYoung 23 Pcs 3600PSI Paint Sprayer Gun: Best for airless accessories
- 24 components
- 50 ft high-pressure hose
- Extension pole and swivel joint
- Multiple tips and filters
This airless accessory set combines a spray gun with tips, filters, a hose, swivel and extension pole. It is aimed at compatible Graco airless sprayers.
Pros
- Long 50 ft hose
- Tips and filters included
- Extension pole improves reach
Cons
- Not an HVLP nozzle kit
- Compatibility centers on listed airless models
The GregYoung set is designed for airless paint sprayer accessories, with a 50 ft high-pressure hose, extension pole, swivel joint, tips, filters and nozzle seat. It is listed as compatible with several Graco airless sprayer models.
The spray gun components support up to 3600 PSI. Threaded connections use 1/4-inch NPT, and the set includes 24 components in total.
Choose this kit when you need reach and replacement accessories in one airless setup. The extension pole can help with higher surfaces, while the swivel joint supports movement around the work area.
This is not the right pick for an HVLP gun that uses interchangeable needle and nozzle assemblies. Check your sprayer model and connection type before ordering.
BENTOHKLE 819 HVLP Air Spray Gun Kit: Best for HVLP control knobs
- 1.4, 1.7 and 2.0 mm nozzles
- Air regulator and oil-water separator
- 15-hole brass atomization cap
- Pattern width up to 280 mm
Three stainless steel nozzle sets cover varnish, topcoats, basecoats and other paints. Three adjustment knobs control fluid, pattern and airflow.
Pros
- Three nozzle sizes
- Regulator and separator included
- Pattern control up to 280 mm
Cons
- The 819 model needs matching replacement parts
- Nozzle choice does not replace proper thinning
The BENTOHKLE 819 kit is a strong choice for HVLP spray gun tips with built-in air control. It includes 1.4, 1.7 and 2.0 mm stainless steel nozzle sets, an air regulator and an oil-water separator.
The 15-hole brass atomization cap is designed for fine, uniform droplets. The three control knobs adjust paint volume, fan width and airflow, with a stated pattern width up to 280 mm.
The kit includes a 600 ml cup, pressure gauge, quick adapter set and paint filter. The stated working pressure is 2.0–3.5 bar with air use of 3.0–3.9 cfm.
Choose it when you want the 819 format with an included regulator and separate air controls. Replacement parts should match the 819 model and its nozzle assembly.
BEETRO 1.2mm Nozzle Kit Stainless Steel: Best for BEETRO TC0555 replacement
- 1.2 mm nozzle set
- Fluid needle, fluid nozzle and air cap
- Stainless steel construction
- Fits BEETRO TC0555 only
This focused replacement set restores the 1.2 mm spray assembly on a BEETRO TC0555 HVLP gun. It is not a universal HVLP nozzle kit.
Pros
- Exact 1.2 mm replacement set
- Stainless steel parts
- Includes needle and air cap
Cons
- Fits BEETRO TC0555 only
- Only one nozzle size
The BEETRO kit is a model-specific 1.2 mm replacement for the BEETRO TC0555 HVLP professional gravity-feed air spray gun. It includes the fluid needle, fluid nozzle and air cap.
This focused set makes sense when the existing gun is compatible and you need the complete 1.2 mm atomizing assembly. Its stainless steel parts are intended for that gun system.
Do not treat it as a universal replacement. The stated fit is BEETRO's TC0555, so compare the gun model before buying and keep the old parts available until the fit is confirmed.
Choose BEETRO for a known TC0555 replacement need, not for a new multi-size spray setup.
VEVOR 3-Piece Air Spray Gun Kit: Best for three-cup coating changes
- 1.0, 1.4 and 1.8 mm nozzles
- 100, 1000 and 1000 ml cups
- Air regulator with pressure gauge
- Three independent controls
Three guns and three cup sizes reduce repeated setup when moving from touch-ups to broad coverage. The 1.0, 1.4 and 1.8 mm range suits different coating tasks.
Pros
- Three nozzle and cup combinations
- Large 1000 ml cups
- Air regulator included
Cons
- Three-piece setup takes more storage
- Nozzle and cup pairing is fixed by gun
The VEVOR 3-piece kit is best when you need three nozzle and cup combinations ready for different coating tasks. It includes a 1.0 mm gun with a 100 ml cup, a 1.4 mm gun with a 1000 ml cup and a 1.8 mm gun with a 1000 ml cup.
The 1.0 mm setup is intended for precise touch-ups, the 1.4 mm setup for topcoats and light-to-medium viscosity coatings, and the 1.8 mm setup for primer and medium-to-heavy viscosity coatings.
Each gun has independent controls for spray pattern, paint flow and air volume. The set also includes an air regulator with pressure gauge, cleaning brush, wrench and strainer.
Choose VEVOR when changing guns and cups is easier for your workflow than changing nozzle assemblies. It takes more storage space than a single-gun kit.
How to choose between HVLP spray gun nozzles and airless tips
Choose HVLP spray gun nozzles when your gun uses compressed air to atomize paint. Choose airless tips when a compatible pump forces coating through a reversible tip at high pressure.
Which HVLP spray gun tip size fits the coating?
The right HVLP spray gun tip depends on coating thickness and the finish you need. The products here cover 1.0 to 2.5 mm, with smaller sizes aimed at detail work and larger sizes suited to heavier materials when allowed by the coating instructions.
A 1.0 or 1.2 mm nozzle can suit small touch-ups or finer material. The VEVOR 1.0 mm gun is intended for precise touch-ups, while BEETRO's 1.2 mm assembly fits the TC0555 only.
The 1.3 to 1.7 mm range covers many general paint and finish tasks. SRQLNTT, Hotorda and BENTOHKLE offer sizes in this range.
A 1.8 to 2.5 mm nozzle can help with heavier coatings, but a larger opening does not remove the need for correct thinning, air pressure and test spraying.
Do you need a nozzle kit or a complete spray gun?
Buy a nozzle kit when your existing gun is in good condition and the replacement assembly is confirmed compatible. Buy a complete spray gun kit when you also need a cup, regulator, air cap or replacement controls.
The BEETRO set is a focused replacement. SRQLNTT, Hotorda and BENTOHKLE are complete HVLP gun kits with multiple nozzle sizes.
For airless equipment, SICOPRO and GregYoung bundle tips with other accessories. Read our guide to the best paint spray gun filters if clogging or debris is part of your setup problem.
How should you prepare an HVLP nozzle kit?
Prepare the nozzle kit by matching the model, cleaning the parts, filtering the coating and adjusting air, fluid and fan controls. Use the coating manufacturer's thinning instructions rather than guessing from nozzle size alone.
A clean air supply also matters. The best HVLP spray gun air regulator can help you control pressure at the gun, while a suitable hose helps maintain the air path.
Before spraying a vehicle, review whether you can use an air compressor to spray paint a car. Use the correct protective equipment, ventilation and pressure-release steps for your paint system.
Which spray gun nozzle kit should you buy?
The SRQLNTT 819 is the best spray gun nozzle kit for most DIY users because it combines three useful HVLP nozzle sizes with a 600 ml cup, regulator and separator. Hotorda is the better fit for a replaceable 1.4, 1.7 and 2.0 mm assembly.
Choose BENTOHKLE H2008 when you want four HVLP sizes, or BENTOHKLE 819 when a regulator and 15-hole atomization cap matter. Choose BEETRO only when you need a TC0555-compatible 1.2 mm replacement.
For airless painting, select SICOPRO for five reversible tips or GregYoung for a longer hose and extension accessories. For pressure washer cleaning, Javneo is the separate tip-and-hose choice.
If reach is the main problem with your paint setup, compare the best paint spray gun extension wand. Gravity-feed users can also review the best gravity feed spray gun cups, best HVLP spray gun cup adapter and best siphon feed spray gun cups before choosing a replacement cup system.
Our top 3 picks at a glance
-
1
Best for all-around HVLP coverage
SRQLNTT 819 HVLP Air Spray Gun Kits
9.6/10 our score
See it on Amazon -
2
Best for pressure washer tip changes
Javneo Pressure Washer Gun and Hose Kit
9.4/10 our score
See it on Amazon -
3
Best for replaceable HVLP nozzles
Hotorda HVLP Spray Gun with Replaceable 1.4mm
9.2/10 our score
See it on Amazon
Frequently asked questions
What is the best spray gun nozzle kit for most DIY work?
The SRQLNTT 819 HVLP Air Spray Gun Kits are the best spray gun nozzle kit for most DIY work here because they include 1.3, 1.7 and 2.0 mm nozzles, a 600 ml cup, an air regulator and an oil-water separator. Those sizes cover many primer, paint and topcoat tasks.
What size HVLP spray gun nozzle should you use?
Use a smaller HVLP spray gun nozzle for thinner materials and detail work, and a larger nozzle for thicker coatings. The kits here range from 1.0 to 2.5 mm.
Always follow the coating maker's thinning and spray instructions, then adjust fluid, pattern and air controls.
Are airless spray tips the same as HVLP spray gun nozzles?
No. Airless spray tips and HVLP spray gun nozzles belong to different systems.
The SICOPRO and GregYoung kits use airless tips with pressure ratings, while the SRQLNTT, Hotorda and BENTOHKLE kits use nozzle and needle assemblies for air-powered HVLP guns.
How do you match a replacement spray gun nozzle?
Match the nozzle to the gun model, thread or assembly design, coating thickness and intended finish. The BEETRO 1.2 mm kit fits the BEETRO TC0555 only, while multi-size kits include several nozzles for one compatible gun.
Confirm the model before ordering.
Do larger HVLP spray gun tips spray thicker paint?
A larger HVLP spray gun tip can help with thicker material, but it does not make every coating suitable for spraying. Material viscosity, thinning instructions, air pressure and fluid control all affect the result.
Test with the correct setup before spraying the final surface.
