8 Best Battery Chargers for DeWalt Air Compressors (November 2026)
The best DeWalt air compressor chargers include the DeWALT DCB107 12V/20V MAX Lithium Ion Charger for standard DEWALT battery platforms, the VOJSALDR 15V Charger for Dewalt DXAEJ14 DXAEPS14 for DXAEPS14 home charging, and the DEWALT 20V MAX* Starter Kit with POWERSTACK for a new 20V MAX setup.
On this page (6 sections)
The best DeWalt air compressor charger is the DEWALT DCB107 for standard 12V and 20V MAX Li-Ion batteries. If your equipment is a DXAEPS14 power station or DCC020IB tire inflator, choose a model-specific power supply instead.
That distinction matters because the word charger covers several different jobs in this lineup. A removable DeWalt battery pack slides onto a battery charger and draws power through the dock.
A jump starter, portable power station or tire inflator may instead need a dedicated AC or DC adapter that feeds its own internal system.
Start with the equipment you actually own. Look for the model number on the compressor, inflator or power station label before you look at cord length or voltage.
The model number tells you which family you are in and stops a standard battery charger being ordered for equipment it cannot serve.
If you have a standard 12V or 20V MAX battery, the DCB107 approach is the most direct. It supports both battery platforms, so it suits households or workshops that keep more than one DeWalt battery size in use.
It also keeps the setup simple because the battery itself is the part that moves between tools.
If you have a DXAEPS14 family power station, a standard battery charger is not the answer. Those units use 14.5V or 15V adapters made for the listed models.
The same caution applies to the DCC020IB tire inflator, which needs its own matched power supply rather than a general battery dock.
Voltage, input type and connector should be checked as a set. AC wall input, DC vehicle input and barrel or battery dock connections are not interchangeable just because the brand name matches.
A charger that looks similar can still be wrong for the device in front of you.
For daily use, think about where charging will happen. A wall charger suits a garage or workshop bench.
A vehicle adapter suits a car, RV or site trip where a household outlet is not available. Choosing the input first prevents a backup charger becoming a second problem.
For a new cordless setup, our guide to the best battery powered air compressor explains where battery platforms fit. If your issue is the motor rather than the charger, see the Best Replacement Motor For Air Compressor guide.
The practical rule is to match the platform or exact model first. Only then compare cord length, charge time and extra features.
That order saves time and avoids buying a well made charger for the wrong system.
Our picks at a glance
-
1
Best for standard DEWALT battery platformsDeWALT DCB107 12V/20V MAX Lithium Ion Charger
9.7/10 our score
See it on Amazon -
2
Best for DXAEPS14 home chargingVOJSALDR 15V Charger for Dewalt DXAEJ14 DXAEPS14
9.6/10 our score
See it on Amazon -
3
Best for a new 20V MAX setupDEWALT 20V MAX* Starter Kit with POWERSTACK
9.5/10 our score
See it on Amazon
- 4
Check itLenoya DCB112 12V/20V Max Battery Charger Replacement
Best for a replacement 12V/20V charger - 5
Check itHKY Replacement Dewalt N557514 Power Supply
Best for the DCC020IB tire inflator - 6
Check itHIENADTOR 15V Jump Starter Charger Replacement Fit
Best for DXAEPS14 protection features - 7
Check itHUZUM 14.5V DC Charger Car Adapter Compatible
Best for charging from a vehicle - 8
Check iteeTao 14.5V AC/DC Adapter Charger Compatible
Best for a simple DXAEPS14 wall adapter
Which DeWalt air compressor charger fits your equipment?
The right DeWalt air compressor charger depends on whether you have a standard 12V or 20V MAX battery, a DXAEPS14 power station or a DCC020IB inflator.
Start with the equipment model. Then match voltage, input type and connector to that model.
A removable battery needs a battery charger. A power station or inflator may need a dedicated adapter.
Do not choose by brand alone. Several items in this guide are only for listed models.
Check the label on your equipment before ordering. That single check narrows the list more than any feature comparison.
How we compared these DeWalt chargers
We compared the stated voltage, input range, battery platform, model compatibility, cord type and included items. Our score weighs those specifications and features against the needs of someone replacing or adding a DeWalt compressor charger.
Voltage comes first because it determines whether a charger can serve the equipment at all. A 12V and 20V MAX battery charger, a 15V power station adapter and a 13.8V inflator supply each solve a different problem.
Input range comes next because AC wall use and DC vehicle use require different designs.
We also checked what is included in the box. A charger only, a charger with a battery, and a power supply with a US cord and guide are not equivalent purchases.
Cord length and connector type matter for placement once compatibility is confirmed.
The DEWALT DCB107 leads because it supports both DEWALT 12V and 20V MAX Li-Ion batteries and charges them in 1 hour or less. That dual platform support makes it the clearest general pick for standard DeWalt battery users.
Its LED diagnostics also give useful feedback during charging.
The model-specific adapters rank closely behind when they fit the exact DeWalt power station or inflator. For a DXAEPS14 owner, a narrow adapter that matches the model can be more useful than a broad battery charger.
For a DCC020IB owner, the matched inflator supply is the correct category.
We have not added testing claims, prices or unsupported product facts. The comparison stays with the stated specs, compatibility lists and included items.
That keeps the ranking tied to what a buyer can verify on the equipment label.
Always confirm the model number before connecting a replacement charger. DeWalt’s official battery and charger information is a useful reference when you need to identify a platform.
Trade-offs should be weighed alongside the score. A wide input range helps with travel or different outlets, while a short fixed cord can limit placement.
Protection features are welcome, but they do not replace correct model matching.
The best choice therefore depends on the system you own. Standard battery users can focus on platform support and diagnostics.
Power station and inflator users should focus on the exact model list first.
| Product | Best for | Battery platform | Input | Charge time | Our score |
|---|---|---|---|---|---|
| DeWALT DCB107 12V/20V MAX Lithium Ion Charger | standard DEWALT battery platforms | DEWALT 12V and 20V MAX Li-Ion | 120V 60Hz | 1 hour or less | 9.7 |
| VOJSALDR 15V Charger for Dewalt DXAEJ14 DXAEPS14 | DXAEPS14 home charging | AC 100V to 240V | 9.6 | ||
| DEWALT 20V MAX* Starter Kit with POWERSTACK | a new 20V MAX setup | 20V MAX | 9.5 | ||
| Lenoya DCB112 12V/20V Max Battery Charger Replacement | a replacement 12V/20V charger | DeWalt 12V and 20V MAX | 9.2 | ||
| HKY Replacement Dewalt N557514 Power Supply | the DCC020IB tire inflator | 9.0 | |||
| HIENADTOR 15V Jump Starter Charger Replacement Fit | DXAEPS14 protection features | 100V to 240V, 50/60Hz | 8.7 | ||
| HUZUM 14.5V DC Charger Car Adapter Compatible | charging from a vehicle | 12V to 24V DC | 8.5 | ||
| eeTao 14.5V AC/DC Adapter Charger Compatible | a simple DXAEPS14 wall adapter | 100V to 240V AC, 50/60Hz | 8.2 |
The best DeWalt air compressor chargers by use
The best general charger is the DCB107, but each remaining pick serves a narrower equipment type. Read the compatibility line carefully because several adapters are made only for listed models.
DeWALT DCB107 12V/20V MAX Lithium Ion Charger: Best for standard DEWALT battery platforms
- Charges DEWALT 12V and 20V MAX Li-Ion batteries
- 1 hour or less charge time
- LED charge diagnostics
- 120V 60Hz input
The DCB107 is the clearest choice when your DeWalt compressor setup uses standard 12V or 20V MAX Li-Ion batteries.
Pros
- Supports 12V and 20V MAX batteries
- LED diagnostics
- Energy Star qualified
Cons
- Requires 120V power
- Not a model-specific charger for DXAEPS14 or DCC020IB
The DeWALT DCB107 is the strongest choice for a standard DeWalt cordless compressor or inflator that uses 12V or 20V MAX Li-Ion batteries. Its 1.25A charger supports both platforms, so one charger can serve compatible batteries across those two voltage families.
The charger uses 120V 60Hz input and a standard 2-prong North American plug. That makes it a wall-powered option, not a vehicle charger.
It suits a garage, workshop or home bench where a household outlet is close by.
An LED diagnostic system communicates charging, charged, power-line trouble and battery temperature conditions. That feedback helps you tell the difference between a battery that is still charging and one that needs attention.
DeWALT also states that the charger can charge a battery in 1 hour or less.
At 5 x 5 x 3.5 inches and 11.04 ounces, it is a compact bench unit rather than a large station. The single port means one battery charges at a time.
For a single compressor or inflator, that is usually enough.
Choose this model when the battery slides into a normal DEWALT 12V or 20V MAX charger. It is not the right match for a DXAEPS14 jump starter or a DCC020IB inflator that needs its own power supply.
VOJSALDR 15V Charger for Dewalt DXAEJ14 DXAEPS14: Best for DXAEPS14 home charging
- 15V DC output
- 100V to 240V AC input
- 6 ft power cord
- Fits listed DXAEJ14 and DXAEPS14 models
This model-specific 15V charger suits listed DeWalt jump starter and digital air compressor power stations.
Pros
- Wide AC input range
- 6 ft cord
- Specific model compatibility
Cons
- Only for listed models
- Not for standard 12V or 20V MAX battery packs
The VOJSALDR charger is made for the listed Dewalt DXAEJ14, DXAEPS14 and DXAEPS14CA power station and jump starter models. Its 15V DC output and AC 100V to 240V input suit home charging for those specific devices.
The 6 ft cord gives you some room between the wall outlet and the equipment. That extra length helps when the power station sits on a bench or floor away from the socket.
The input range also gives flexibility across different AC supplies.
The compatibility is narrow, so the model number matters more than the brand name alone. This charger will not suit other DeWalt models outside the listed family.
It is also not a charger for standard 12V or 20V MAX battery packs.
This is a better fit for a DeWalt digital air compressor power station than a standard battery charger. Choose it when your device matches one of the listed models.
Keep the original model label handy when you order.
DEWALT 20V MAX* Starter Kit with POWERSTACK: Best for a new 20V MAX setup
- Charger included
- DCBP034 20V MAX XR POWERSTACK Compact battery
- Compact battery size
- LED state-of-charge indicator
The starter kit makes sense when you need both a 20V MAX charger and a DCBP034 POWERSTACK Compact battery.
Pros
- Charger and battery together
- Compact battery
- LED state-of-charge indicator
Cons
- 20V MAX platform only
- Not a replacement cord for a DXAEPS14 power station
The DEWALT 20V MAX starter kit suits buyers who need both a charger and a compact battery for a compatible 20V MAX setup. It includes 1 charger and 1 DCBP034 20V MAX XR POWERSTACK Compact battery.
The DCBP034 battery measures 4.1 x 2.5 x 1.7 in and has an LED state-of-charge indicator. That indicator gives quick visibility before you start work.
DEWALT describes it as part of its 20V MAX battery line and says it is compatible with 20V MAX tools.
The compact size is the main appeal for tight spaces. A smaller battery can improve maneuverability on overhead or close jobs.
The trade-off is that this kit is tied to the 20V MAX platform only.
Choose this kit when you are starting a 20V MAX system or need another charger and battery together. It is not a replacement AC cable for a DXAEPS14 power station.
Check your tool compatibility before ordering.
Lenoya DCB112 12V/20V Max Battery Charger Replacement: Best for a replacement 12V/20V charger
- Supports 12V and 20V MAX batteries
- 100V to 260V support
- LED charge status
- Protection against over-charge and short circuit
Lenoya is a replacement option for buyers matching a DeWalt 12V/20V charger family, including the DCB112 and other listed models.
Pros
- Wide input range
- 12V and 20V support
- LED status information
Cons
- Confirm the charger version before ordering
- Model compatibility must match your battery
Lenoya is a replacement-style charger for the DeWalt 12V and 20V MAX battery family. Its compatibility information includes DCB102, DCB105, DCB112, DCB107, DCB118, DCB101, DCB115 and other listed charger models.
It supports 100V to 260V input and uses LED signals for charging status. A flashing pattern indicates charging in progress, while a steady indication shows a full charge.
The stated protection system covers over-charge, over-voltage, short circuit and overheating.
That wide input range may suit users who charge in different locations. Dual voltage support for both 12V and 20V Max batteries also helps mixed setups.
The main caution is version control.
Choose Lenoya when your replacement need is tied to a compatible 12V or 20V MAX battery charger. Check the exact charger version before ordering because the information includes both 1-port and 4-port versions.
Match the battery model as well as the charger name.
HKY Replacement Dewalt N557514 Power Supply: Best for the DCC020IB tire inflator
- Fits DEWALT DCC020IB and DCC020IB-CA
- 13.8V output
- 138W output power
- 100V to 240V AC input
This power supply is aimed at the DCC020IB 20V MAX tire inflator rather than a removable DeWalt battery charger.
Pros
- Specific DCC020IB fit
- 138W output
- 100V to 240V input
Cons
- Not for standard 12V or 20V MAX battery charging
- Check the inflator model before ordering
The HKY power supply targets the DEWALT DCC020IB 20V MAX tire inflator and DCC020IB-CA. It provides 13.8V output and 138W output power from a 100V to 240V AC input.
This is a power supply for the inflator, not a general charger for removable 12V or 20V MAX batteries. It includes a power supply, US power cord and user guide.
The package is aimed at replacing the N557514 supply for the listed inflator type.
The higher output figure reflects the inflator use case rather than a battery dock function. That means it should not be judged like a standard DCB107 charger.
Its value comes from matching the DCC020IB system it was made for.
Choose it when your DCC020IB needs a replacement N557514 power supply. Check whether your inflator is the DCC020IB or DCC020IB-CA before ordering.
Confirm the plug and model label before connecting it.
HIENADTOR 15V Jump Starter Charger Replacement Fit: Best for DXAEPS14 protection features
- Fits listed DXAEPS14 models
- 100V to 240V input
- 15V output
- Over-current, over-temperature and short-circuit protection
HIENADTOR fits listed DXAEPS14, DXAEPS14CA and DXAEP514 jump starter power stations and includes a 6 ft cord.
Pros
- Wide input range
- 6 ft cord
- 5 protection functions
Cons
- Only for listed jump starter models
- Not for other DeWalt models
HIENADTOR is a 15V replacement charger for the listed DeWalt DXAEPS14, DXAEPS14CA and DXAEP514 1400 or 1600 peak automotive jump starter models. It uses 100V to 240V input at 50/60Hz and includes a 6 ft cord.
The charger has a US standard wall plug and protection against over-current, over-temperature, overload, over-voltage and short circuit. Those features make it a focused replacement for the listed power stations.
The snap-in plug design is also described as more durable.
The 6 ft cord gives practical reach from outlet to device. Global input voltage may help users who move between regions.
As with other adapters here, compatibility remains limited to the listed models.
Choose it when the model number matches. It is not intended for other DeWalt models or standard DeWalt battery packs.
Verify the DXAEPS14 family code on your unit before ordering.
HUZUM 14.5V DC Charger Car Adapter Compatible: Best for charging from a vehicle
- 12V to 24V input
- 14.5V DC output
- 6.5 ft cable
- Fits listed DXAEPS14 models
HUZUM is the vehicle-focused option for listed DXAEPS14 and DXAEPS14CA power stations when a cigarette-lighter connection is useful.
Pros
- Vehicle input range
- 6.5 ft cable
- Built-in fuse
Cons
- Requires a vehicle power socket
- Model-specific compatibility
HUZUM is the vehicle-charging choice for listed DXAEPS14 and DXAEPS14CA power stations. It accepts 12V to 24V DC input and supplies 14.5V DC through a 6.5 ft cable.
The adapter uses a vehicle cigarette-lighter connection and includes a built-in fuse. Its stated protection features cover overcurrent, overcharge, short circuit and overheating.
The longer cable helps when the power station sits in a boot, cab or cargo area.
This design suits road trips, site work and RV use where wall power is not available. It is not a wall charger and cannot replace an AC adapter at home.
The input source must match the vehicle socket you plan to use.
Choose it when you need to recharge the compatible DeWalt power station from a car, RV or other vehicle socket. Confirm the model and connector before use.
Check that your vehicle socket accepts this adapter type.
eeTao 14.5V AC/DC Adapter Charger Compatible: Best for a simple DXAEPS14 wall adapter
- 100V to 240V AC input
- 14.5V DC output
- 0.8A output current
- Over-voltage, over-current and short-circuit protection
eeTao is a wall-powered 14.5V adapter for the listed DeWalt DXAEPS14 family and related power stations.
Pros
- Wide AC input range
- Barrel connector
- Three protection functions
Cons
- 0.8A output
- Only for listed compatible models
eeTao is a wall adapter for the listed DeWalt DXAEPS14, DXAEPS14CA, DXAEP514 and related power station models. It provides 14.5V DC at 0.8A from a 100V to 240V AC input.
The adapter uses a barrel connector and includes over-voltage, over-current and short-circuit protection. Its role is narrower than the DCB107 because it is designed around the listed portable power station family.
The output at 0.8A also sets expectations for charging pace.
Wall power makes this a simple home or workshop option. The wide AC input range gives flexibility with different outlets.
Compatibility is still limited to the named models.
Choose eeTao when your model matches and you want a simple AC wall adapter. If the battery is old or will not accept a charge, replacing the charger alone may not solve the problem.
A volt meter can help tell whether the charger or the battery is at fault.
How to choose a DeWalt air compressor charger
Choose a charger by equipment model first, then check voltage, input type and connector. The wrong voltage or connector can make an otherwise similar charger unsuitable.
Match the battery platform or model number
For standard DEWALT 12V and 20V MAX Li-Ion batteries, the DCB107 is the most direct match. The Lenoya replacement also covers several listed DeWalt charger families and battery models.
For a DXAEPS14 power station, use one of the 15V or 14.5V adapters made for that model family. For a DCC020IB tire inflator, use the power supply matched to the DCC020IB.
Check AC versus DC charging
Wall adapters use AC input from an outlet and convert it to DC output. The HUZUM adapter is different because it takes 12V to 24V DC input from a vehicle.
A 120V wall charger cannot replace a vehicle adapter unless the equipment and charger are designed for that power source. Check the input line before plugging anything in.
Compare cord length and connector type
Cord length matters when the compressor or power station sits away from the outlet. The listed options range from 6 ft to 6.5 ft for several model-specific adapters.
Those lengths help with bench, floor and vehicle placements. A longer cord does not fix a wrong voltage or connector, so compatibility still comes first.
Measure the distance before you assume a cord will reach.
Connector shape and size also matter. The eeTao adapter uses a barrel connector, while other models identify their connection in different ways.
Battery dock chargers use a different connection again.
Match the original charger and equipment model rather than relying on appearance. Similar plugs can hide different voltage needs.
For cord planning around a larger compressor, our guide to the Best Air Compressor Extension Cord covers a separate power issue. If your compressor uses another brand’s battery system, compare it with the best Craftsman air compressor battery guide.
Safe setup and care for a replacement charger
Use the charger in a dry area with the correct input power. Keep the cord free from sharp bends and avoid running it under heavy loads.
A damaged cord or plug should be taken out of service.
Let the charger and battery stay at normal room conditions if the equipment indicates that the battery is too hot or too cold. Charging in extreme heat or cold can interrupt the process.
Give the battery time to settle before you try again.
Inspect the connector before every use. Look at the plug, cable and housing for cracks, loose parts or bent pins.
Stop if any part is damaged, and do not force a connector that does not fit.
Use only the input the charger is rated for. A 120V wall charger, a 100V to 240V adapter and a 12V to 24V vehicle adapter each need their matched source.
Putting a charger on the wrong supply can damage the charger or the equipment.
Keep vents clear and the charger on a stable surface while it runs. Heat build-up is harder to manage in a closed case or under fabric.
If the charger feels unusually hot, smells or stops responding, disconnect it and check the model match.
Store the charger in a dry place when it is not in use. Coil the cord loosely rather than pulling it tight around a sharp edge.
That habit helps the plug and cable last longer.
Keep the charger matched to the equipment listed for it. A standard battery charger will not replace a power station adapter by force.
A model-specific supply will not charge a different battery platform safely.
The How To Use DeWalt Air Compressor? guide covers basic compressor operation, while this guide focuses on charging compatibility. Reading both helps separate a charger fault from a compressor fault.
When a battery will not accept a charge, check age and condition as well as the charger. Older batteries can fail even with a working adapter.
Confirm the model, voltage and connector before you replace parts.
Care is mostly about dry storage, gentle cords and correct power. Those simple habits protect the charger, the battery and the compressor it serves.
Final pick: which DeWalt air compressor charger should you buy?
The DEWALT DCB107 is the best DeWalt air compressor charger for standard 12V and 20V MAX Li-Ion batteries. It supports both platforms, charges in 1 hour or less and gives LED diagnostics for charging status.
Pick the VOJSALDR or HIENADTOR for a listed DXAEPS14 family power station. Pick the HKY for a DCC020IB inflator.
Pick the HUZUM when vehicle charging is the priority.
If you need a battery and charger together for a new 20V MAX setup, the POWERSTACK starter kit is the bundled option. If you need a replacement 12V or 20V charger, check the Lenoya version carefully.
If you want a simple wall adapter for the DXAEPS14 family, the eeTao option fits that narrower role.
Match the model number before choosing by cord length or price tier. A precise fit is more useful than a higher output number that does not match your DeWalt equipment.
Check voltage, input type and connector as a complete set.
For most standard battery users, the DCB107 remains the simplest answer. For power station and inflator owners, the model-specific adapter is the correct answer.
Choosing by equipment first will point you to the right charger every time.
Our top 3 picks at a glance
-
1
Best for standard DEWALT battery platforms
DeWALT DCB107 12V/20V MAX Lithium Ion Charger
9.7/10 our score
See it on Amazon -
2
Best for DXAEPS14 home charging
VOJSALDR 15V Charger for Dewalt DXAEJ14 DXAEPS14
9.6/10 our score
See it on Amazon -
3
Best for a new 20V MAX setup
DEWALT 20V MAX* Starter Kit with POWERSTACK
9.5/10 our score
See it on Amazon
Frequently asked questions
What is the best DeWalt air compressor charger?
The DEWALT DCB107 is the best general choice when your compressor setup uses DEWALT 12V or 20V MAX Li-Ion batteries. For a DXAEPS14 power station or DCC020IB tire inflator, use a charger matched to that exact model instead.
Can a DeWalt 20V battery charger charge a DeWalt air compressor?
A DEWALT 20V battery charger can charge a compatible 20V MAX Li-Ion battery used with a cordless compressor or inflator. It does not automatically replace the AC power supply for a jump starter, power station or DCC020IB inflator.
How do I match a replacement DeWalt charger?
Match the charger to the battery platform or the exact compressor model. Check the model number, voltage, connector and power source before ordering.
DXAEPS14 chargers, DCC020IB power supplies and standard 12V/20V MAX battery chargers serve different systems.
Can I charge a DeWalt air compressor battery in a car?
Yes, when the charger is designed for vehicle input and matches the compressor or power station. The HUZUM adapter accepts 12V to 24V DC input for listed DXAEPS14 models.
A standard wall charger needs the correct AC power source.
