9 Best Gravity Feed HVLP Spray Guns (November 2026)

The best gravity feed HVLP spray guns include the B4B BANG 4 BUCK BANG4BUCK Professional HVLP Gravity for flexible coating work, the Hotorda HVLP Air Gravity Spray Gun Set for two-gun versatility, and the InoKraft D1 LVLP Air Spray Gun Premium for a complete air setup.

On this page (15 sections)

1. How we chose the best gravity feed HVLP spray gun
2. 1. B4B BANG 4 BUCK Professional HVLP Gravity: Best for flexible coating work
3. 2. Hotorda HVLP Air Gravity Spray Gun Set: Best for two-gun versatility
4. 3. InoKraft D1 LVLP Air Spray Gun Premium: Best for a complete air setup
5. 4. ENDOZER Professional HVLP Spray Gun Set Gravity: Best for adjustable automotive coatings
6. 5. PNTGREEN HVLP Spray Gun Gravity Feed: Best for simple 1.4mm spraying
7. 6. B4B BANG 4 BUCK High Performance HVLP: Best for large paint batches
8. 7. TCP Global Professional HVLP Spray Gun 2.0mm: Best for automotive primers
9. 8. NEIKO 31216A Air Spray Paint Gun: Best for lower air use
10. 9. JUSTPRO Professional 2-in-1 HVLP Gravity Feed: Best for detail and broad coverage
11. What nozzle size works best for a gravity feed spray gun?
12. How much CFM does a gravity feed HVLP spray gun need?
13. How should you clean a gravity feed HVLP spray gun?
14. Gravity feed HVLP spray gun vs siphon feed: which should you choose?
15. Verdict: which is the best gravity feed HVLP spray gun?

The best gravity feed HVLP spray gun for most DIY paint work is the B4B BANG 4 BUCK Professional HVLP Gravity. It includes 1.4mm, 1.7mm and 2.5mm nozzles, a 1,000cc aluminum cup and controls for spray pattern, fluid and air pressure.

Gravity feed guns work well for controlled paint finishing because the cup sits above the gun body. That setup can help you use smaller batches without leaving as much material in a lower pickup tube.

This roundup compares gravity feed HVLP spray guns for automotive paint, primers, clear coats, furniture and small workshop projects. We checked nozzle sizes, cup capacity, included controls and the stated air needs.

For a wider overview of spray gun types, read our best paint spray gun guide. If your compressor is small, see which models can run as a 2 CFM spray gun.

Our picks at a glance

1. 1
   Best for flexible coating work

   B4B BANG 4 BUCK BANG4BUCK Professional HVLP Gravity

   9.7/10 our score

   See it on Amazon
2. 2
   Best for two-gun versatility

   Hotorda HVLP Air Gravity Spray Gun Set

   9.6/10 our score

   See it on Amazon
3. 3
   Best for a complete air setup

   InoKraft D1 LVLP Air Spray Gun Premium

   9.5/10 our score

   See it on Amazon

4. 4

   ENDOZER Professional HVLP Spray Gun Set Gravity

   Best for adjustable automotive coatings
   Check it
5. 5

   PNTGREEN HVLP Spray Gun Gravity Feed

   Best for simple 1.4mm spraying
   Check it
6. 6

   B4B BANG 4 BUCK BANG4BUCK High Performance HVLP

   Best for large paint batches
   Check it
7. 7

   TCP Global Professional HVLP Spray Gun 2.0mm

   Best for automotive primers
   Check it
8. 8

   NEIKO 31216A Air Spray Paint Gun

   Best for lower air use
   Check it
9. 9

   JUSTPRO Professional 2-in-1 HVLP Gravity Feed Spray

   Best for detail and broad coverage
   Check it

How we chose the best gravity feed HVLP spray gun

The B4B BANG 4 BUCK Professional HVLP Gravity ranks first because it combines 3 nozzle sizes, a large aluminum cup, a gauge and adjustable controls. Hotorda follows with 2 complete spray guns for detail and broader work.

Our score weighs specs, features and buyer feedback against what you're shopping for. We did not treat a brand's performance claims as independent test results.

The main factors were nozzle range, cup size, air control, included cleaning parts and how clearly each gun fits a specific coating job. Compressor compatibility also matters, especially for guns with high stated air consumption.

For a complete setup with air treatment and accessories, compare these picks with our best HVLP spray gun kit guide.

1. B4B BANG 4 BUCK Professional HVLP Gravity: Best for flexible coating work

1

B4B BANG 4 BUCK BANG4BUCK Professional HVLP Gravity: Best for flexible coating work

9.7/10Our score

• 1.4mm, 1.7mm and 2.5mm nozzles
• 1,000cc aluminum cup
• Micrometer air regulator with gauge
• Adjustable spray, fluid and air controls

Three nozzle sizes and a 1,000cc aluminum cup make this a flexible choice for primers, clear coats and other coatings.

See it on Amazon

Pros

• Three nozzle sizes
• Large aluminum cup
• Adjustable air, fluid and spray pattern controls

Cons

• Pre-installed nozzle may need extra effort to remove

The B4B BANG 4 BUCK Professional HVLP Gravity is the strongest all-purpose pick in this group. Its 1.4mm, 1.7mm and 2.5mm stainless steel nozzle set gives you more room to match the gun to primers, clear coats and thicker coatings.

The 1,000cc aluminum cup suits longer jobs than a small detail cup. A true micrometer air regulator with gauge is included, and separate controls adjust the spray pattern, fluid flow and air pressure.

The gun is rated for a maximum pressure of 45 psi. The product information also names base coats, clear coats, high-build primers, thick enamels, latex paints and other coatings as intended uses.

Confirm coating instructions before spraying.

Choose this gun when you want one gravity feed spray gun for several coating types. The pre-installed nozzle is tightened for air tightness, so removal may take extra effort.

2. Hotorda HVLP Air Gravity Spray Gun Set: Best for two-gun versatility

2

Hotorda HVLP Air Gravity Spray Gun Set: Best for two-gun versatility

9.6/10Our score

• 0.8mm and 1.4mm spray guns
• 125ml and 600ml cups
• Cleaning kit and carrying box
• Locking air pressure regulator

The two-gun setup covers detail work with the smaller gun and broader paint jobs with the 1.4mm gun.

See it on Amazon

Pros

• Two spray guns
• Two cup sizes
• Cleaning kit and storage box

Cons

• Plastic cups need careful handling

Hotorda is the best choice when one spray gun cannot cover your full range of projects. The set includes a 0.8mm gun with a 125ml cup and a 1.4mm gun with a 600ml cup, so you can switch between small detail work and broader surface spraying.

The kit also includes a locking air pressure regulator, 2 wrenches, a brush cleaning kit and a blue carrying box. Stainless steel needles and nozzles are used in the spray guns.

Hotorda describes the set for cars, furniture, walls, crafts and other painting projects. The brand also recommends testing and adjusting the gun with water before use and thinning pigment according to the coating instructions.

Pick it if you want separate tools for models, touch-ups and larger surfaces. The plastic cups are convenient to carry, but they should be cleaned and stored carefully.

For a fuller cleanup routine, see HVLP spray gun storage.

3. InoKraft D1 LVLP Air Spray Gun Premium: Best for a complete air setup

3

InoKraft D1 LVLP Air Spray Gun Premium: Best for a complete air setup

9.5/10Our score

• 1.3mm, 1.5mm and 1.7mm nozzle sets
• Oil-water separator
• Air pressure regulator
• One-piece forged aluminum body

This LVLP kit includes air-control and moisture-filtering parts, making it useful when you want more than a bare spray gun.

See it on Amazon

Pros

• Air regulator and oil-water separator
• Three nozzle sizes
• Cleaning kit and storage box

Cons

• Its recommended air use may exceed a small compressor

InoKraft's D1 is an LVLP gun rather than a standard HVLP model, but it belongs in this comparison because its gravity feed layout and included air accessories solve a common workshop problem.

The kit includes 1.3mm, 1.5mm and 1.7mm nozzle sets, a 600cc cup, an air pressure regulator, an oil-water separator, filters, a cleaning kit and a storage box. Its one-piece forged aluminum body has a Teflon coating.

InoKraft recommends 9.7 to 10.2 CFM of air consumption and working pressure from 29 psi to 51 psi. Check your compressor's delivered CFM before buying.

Choose D1 when moisture control and setup parts matter as much as the spray gun. The 3M paint cup adaptor is included, which can help if that cup system is already part of your workflow.

4. ENDOZER Professional HVLP Spray Gun Set Gravity: Best for adjustable automotive coatings

4

ENDOZER Professional HVLP Spray Gun Set Gravity: Best for adjustable automotive coatings

9.2/10Our score

• 1.4mm, 1.7mm and 2.0mm nozzles
• 600ml gravity cup
• Air pressure gauge
• Fluid, pattern and air controls

Three stainless steel nozzle sizes and separate controls make this a practical option for changing coating thicknesses.

See it on Amazon

Pros

• Three nozzle sizes
• Air pressure gauge
• Paint filter included

Cons

• The product highlight excludes latex paint

ENDOZER gives you 1.4mm, 1.7mm and 2.0mm stainless steel nozzles with a 600ml gravity feed cup. That range covers smaller finishing work and thicker automotive materials without limiting you to one tip.

The gun has separate fluid, pattern and air controls, plus an air pressure gauge. A brass hood uses a 15-hole design, and the set includes a quick adapter, paint filter and cleaning-related accessories.

The product highlight identifies auto paint, primer, clear coat and touch-up work, while also excluding latex paint. Treat that coating limit as a key buying check if you plan to spray house paint.

Pick ENDOZER when you want a broad nozzle range in a mid-size cup. Its 1/4 in NPT inlet should also be matched with the right hose and compressor fittings.

5. PNTGREEN HVLP Spray Gun Gravity Feed: Best for simple 1.4mm spraying

5

PNTGREEN HVLP Spray Gun Gravity Feed: Best for simple 1.4mm spraying

9.1/10Our score

• 1.4mm stainless steel nozzle
• 600cc detachable cup
• Three adjustment valves
• 360-degree nozzle direction adjustment

A 1.4mm nozzle, 600cc cup and three adjustment valves keep this gun focused on straightforward painting and touch-up work.

See it on Amazon

Pros

• Simple 1.4mm setup
• Detachable cup
• Adjustable liquid, air and spray range

Cons

• The stated 15 CFM air use needs a large compressor

PNTGREEN keeps the setup simple with a 1.4mm stainless steel nozzle and a 600cc detachable gravity feed cup. Three adjustment valves control liquid volume, air volume and spray range.

The nozzle direction adjusts 360 degrees through the nozzle cap. The gun has a brass air cap, a 1/4 in air inlet and a stated operating pressure of 43 psi.

PNTGREEN lists an air consumption of 15 CFM. That is a high requirement for a small compressor, so check delivered air before choosing this model.

Tank capacity alone does not tell you whether a compressor can keep up.

Choose it for basic painting, touch-up work and users who prefer a fixed 1.4mm setup. Clean the cup thoroughly before and after spraying to reduce dried paint and blocked passages.

6. B4B BANG 4 BUCK High Performance HVLP: Best for large paint batches

6

B4B BANG 4 BUCK BANG4BUCK High Performance HVLP: Best for large paint batches

9.0/10Our score

• 1.4mm, 1.7mm and 2.5mm fluid tips
• 1,000cc aluminum cup
• Micrometer regulator with gauge
• Adjustable spray pattern and fluid control

The large cup and three fluid tips suit longer sessions where frequent refills would interrupt the work.

See it on Amazon

Pros

• Large 1,000cc cup
• Three fluid tips
• Air regulator included

Cons

• Pre-installed nozzle may be tight to remove

This B4B BANG 4 BUCK model is a close match to the first pick, with a red finish and the same useful combination of 1.4mm, 1.7mm and 2.5mm fluid tips. Its 1,000cc aluminum cup reduces the need for frequent refills during larger jobs.

A micrometer air regulator with gauge is included. The gun also has controls for spray pattern, fluid flow and air pressure, which help you tune coverage for different coatings.

The stated maximum pressure is 45 psi. Intended materials include base coats, clear coats, high-build primers, thick enamels, latex paints and other coatings.

Choose this version when the larger cup and broad tip range fit your workflow. As with the other B4B model, the pre-installed nozzle may need extra effort to remove.

7. TCP Global Professional HVLP Spray Gun 2.0mm: Best for automotive primers

7

TCP Global Professional HVLP Spray Gun 2.0mm: Best for automotive primers

8.8/10Our score

• 2.0mm fluid tip
• 1-liter aluminum cup
• Pattern, fluid and air adjustment knobs
• Maintenance kit and regulator

The 2.0mm tip and 1-liter cup make this a focused choice for basecoat, clearcoat, primer and single-stage automotive materials.

See it on Amazon

Pros

• Large aluminum cup
• 2.0mm tip
• Maintenance kit included

Cons

• Single listed fluid-tip size gives less setup range

TCP Global focuses on automotive work with a 2.0mm fluid tip and a large 1-liter aluminum cup. The gun is designed for basecoat, clearcoat, primer and single-stage materials.

Its adjustment knobs control spray pattern, fluid flow and air pressure. The set includes a micrometer air regulator with gauge, a gun maintenance kit, wrenches, a brush, a cup filter and an air adjustment lock.

The full baffle head assembly is designed for even spray patterns. The product data states a maximum pressure of 180 psi, so use the working pressure guidance for your setup and follow safe compressor practices.

Choose TCP Global when a large cup and 2.0mm tip suit your automotive materials. It is less flexible than the multi-tip guns if you switch between thin and thick coatings often.

8. NEIKO 31216A Air Spray Paint Gun: Best for lower air use

8

NEIKO 31216A Air Spray Paint Gun: Best for lower air use

8.3/10Our score

• 2.0mm nozzle
• 600cc aluminum cup
• Three adjustable valve knobs
• Average air consumption of 4.5 CFM

Its 4.5 CFM average air consumption gives small-compressor owners a useful starting point, while the 2.0mm nozzle suits clear coat and household projects.

See it on Amazon

Pros

• Lower stated average air use
• Steel body
• Air gauge and regulator included

Cons

• Only one listed nozzle size

NEIKO is the clearest choice here for buyers comparing air use. It states an average air consumption of 4.5 CFM, along with 40 psi operating pressure and 10 psi working pressure.

The gun uses a 2.0mm nozzle and a 600cc aluminum cup. Three adjustable valve knobs control paint flow, pressure and spray pattern.

A metal air gauge and regulator, cleaning brush and multi-size wrench are included.

The one-piece steel body, stainless steel nozzle and brass cap are built around a simple gravity feed design. The 2.0mm nozzle fits clear coat and several automotive and household projects.

Choose NEIKO when your compressor has limited delivered air but still supports the stated requirements. It is a focused gun, not a multi-nozzle system, so confirm that 2.0mm matches your coating.

9. JUSTPRO Professional 2-in-1 HVLP Gravity Feed: Best for detail and broad coverage

9

JUSTPRO Professional 2-in-1 HVLP Gravity Feed Spray: Best for detail and broad coverage

8.1/10Our score

• 0.8mm and 1.4mm nozzles
• 125ml and 600ml cups
• Locking pressure regulator
• Blue storage case

Two nozzle and cup combinations let you move between small detail work and larger automotive coating areas.

See it on Amazon

Pros

• Two nozzle and cup sizes
• Locking regulator with gauge
• Storage case included

Cons

• The product claims include performance figures that need independent verification

JUSTPRO combines a 0.8mm nozzle with a 125ml cup and a 1.4mm nozzle with a 600ml cup. That pairing fits detailed priming or model work as well as larger automotive coating areas.

The set includes a locking pressure regulator with gauge, cleaning kit, lubricant, measuring cap, strainer, viscosity cup and blue case. Its maximum pressure is stated as 58 psi.

The product information includes claims about faster coverage, lower overspray, salt spray testing and seal performance. Those are brand claims, not independent test results, so use the confirmed nozzle, cup and pressure details for your comparison.

Choose JUSTPRO when you want two cup sizes in one portable case. Check the included parts and current instructions before relying on any claimed quick-release or compressor-fit feature.

What nozzle size works best for a gravity feed spray gun?

A 1.3mm to 1.4mm nozzle is a useful starting range for many lighter paint and finishing jobs. Larger 1.7mm to 2.5mm tips can suit thicker primers and coatings, while a 0.8mm tip is better matched to small detail work.

The right size depends on paint viscosity, the finish you want and the gun's adjustment range. A multi-nozzle set gives you more flexibility, but only if the compressor can supply the required air.

Do not choose a tip by size alone. Follow the coating instructions, strain paint when appropriate and test the fan pattern on scrap material before spraying the finished surface.

How much CFM does a gravity feed HVLP spray gun need?

A gravity feed HVLP spray gun needs enough continuous air to maintain its pattern while you pull the trigger. The stated requirements in this group range from NEIKO's 4.5 CFM average air use to PNTGREEN's 15 CFM figure.

Use the compressor's delivered CFM at the relevant pressure as your comparison point. A large tank can delay pressure loss, but it cannot replace a compressor that lacks enough continuous output.

Read our guide to how much CFM a spray gun needs before choosing a gun. If your compressor is limited, NEIKO is the first model to investigate, but confirm the complete air specification for your job.

How should you clean a gravity feed HVLP spray gun?

Clean the cup, nozzle, needle and air cap soon after spraying. Dried coating can narrow passages, change the fan pattern and make later adjustment harder.

Empty unused material according to its safety instructions. Then use the correct cleaning material for the coating, brush the removable parts and check that air and fluid passages are clear before storage.

The Hotorda, InoKraft and ENDOZER sets include cleaning tools or filters. Those parts help with maintenance, but they do not replace the coating manufacturer's cleaning directions or proper protective equipment.

Gravity feed HVLP spray gun vs siphon feed: which should you choose?

Choose a gravity feed HVLP spray gun when you want a top-mounted cup, controlled small batches and a wide choice of compact spray guns. Choose siphon feed when your workflow depends on a lower container or a different cup arrangement.

Gravity feed is especially useful for touch-up work because the cup can hold a smaller amount of material. A larger 600cc or 1,000cc cup makes more sense when you want fewer refills on a broad surface.

For a separate comparison, see our best siphon feed spray gun guide. Match the gun to your compressor, coating thickness and cleaning routine before comparing extra accessories.

Verdict: which is the best gravity feed HVLP spray gun?

The B4B BANG 4 BUCK Professional HVLP Gravity is the best gravity feed HVLP spray gun for most DIY users because it combines 3 nozzle sizes, a 1,000cc aluminum cup and adjustable air, fluid and pattern controls.

Pick Hotorda if you want 2 spray guns for detail and larger work. Pick InoKraft if you need a more complete air setup with a regulator, oil-water separator and several nozzle sizes.

Choose NEIKO if its stated 4.5 CFM average air use fits your compressor.

Before ordering, compare delivered CFM, nozzle size, cup capacity and coating instructions. Those four checks matter more than the number of accessories in the box.

Our top 3 picks at a glance

1. 1
   Best for flexible coating work

   B4B BANG 4 BUCK BANG4BUCK Professional HVLP Gravity

   9.7/10 our score

   See it on Amazon
2. 2
   Best for two-gun versatility

   Hotorda HVLP Air Gravity Spray Gun Set

   9.6/10 our score

   See it on Amazon
3. 3
   Best for a complete air setup

   InoKraft D1 LVLP Air Spray Gun Premium

   9.5/10 our score

   See it on Amazon

Frequently asked questions

What is a gravity feed HVLP spray gun?

A gravity feed HVLP spray gun holds paint above the nozzle so gravity helps move material into the spray path. HVLP means high volume, low pressure.

The gun uses a larger air volume at lower pressure than some conventional sprayers, so compressor capacity and air delivery still matter.

What nozzle size should you use with a gravity feed HVLP spray gun?

Use a smaller nozzle for thinner materials and detail work, and a larger nozzle for thicker primers or coatings. The products here range from 0.8mm to 2.5mm.

Always match the tip to the coating instructions, then adjust fluid, fan pattern and air flow.

How much air does a gravity feed HVLP spray gun need?

Air needs vary by gun and setup. NEIKO states an average use of 4.5 CFM, while PNTGREEN states 15 CFM and InoKraft recommends 9.7 to 10.2 CFM.

Compare the gun's air requirement with your compressor's delivered CFM, not only its tank size.

Is a gravity feed spray gun better than a siphon feed gun?

A gravity feed gun can help reduce leftover paint because the cup sits above the nozzle and feeds material downward. A siphon feed gun may suit a different cup or work setup.

Compare both designs in our best siphon feed spray gun guide.