6 Best Craftsman Air Compressor Capacitors (November 2026)
The best Craftsman air compressor capacitors include the Yancheng Yatai YATAI CBB60 Capacitor 60uF 300V AC for 60 uF run motors, the YWBL-WH CBB60 Run Capacitor for 120 uF run capacitors, and the BOJACK Run Capacitor 120 uF 250V AC for a 120 uF wire-lead replacement.
On this page (5 sections)
The best Craftsman air compressor capacitor depends on the original motor rating, not the Craftsman name alone. The brand on the compressor will not tell you the capacitance you need.
The original capacitor label and the motor plate will.
Match capacitance, voltage, run or start function, terminal style and physical size before you order a replacement. Each of those details affects how the part connects and how it works in the circuit.
A close looking cylinder can still be the wrong part.
The YATAI is the top pick for a motor marked 60 uF and 300 VAC. It suits a run circuit that calls for those exact values.
It is not a general choice for every Craftsman compressor.
HQRP is the more direct choice for a 100 uF, 250 VAC Craftsman replacement. Its stated compatibility covers Craftsman compressors, but the ratings still need to match your old part.
Brand compatibility alone is not enough.
The YWBL-WH and BOJACK cover compatible 120 uF motors at 250 VAC. They are options for a motor that specifies that capacitance and voltage.
They should not be used to replace 60 uF or 100 uF parts.
We compared the capacitor ratings, stated applications, wiring, mounting styles and dimensions supplied for these products. The comparison comes from product information, not hands on work.
We did not test them on a compressor, so use your original capacitor and motor label as the final fit check.
Capacitance is the value in microfarads, often shown as uF or MFD. Voltage is shown in VAC on these run and start parts.
Motor role matters because a start capacitor and a run capacitor do different jobs.
Physical fit includes body diameter, body height, lead or terminal style, and mounting method. A part that is too long may not sit safely under the motor cover.
A part with the wrong terminals may not connect cleanly to the existing wires.
If the old label is missing, check the motor documentation or ask a qualified technician before ordering. Do not guess a capacitance from shape or from a similar model.
The safest choice is the part that matches the documented electrical and physical requirements.
Take a photo of the old capacitor before removal, if access allows it. Write down every marking, including capacitance, voltage, frequency and temperature range.
That record makes ordering faster and reduces the chance of a mismatched replacement.
Our picks at a glance
-
1
Best for 60 uF run motorsYancheng Yatai YATAI CBB60 Capacitor 60uF 300V AC
9.7/10 our score
See it on Amazon -
2
-
3
Best for a 120 uF wire-lead replacementBOJACK Run Capacitor 120 uF 250V AC
9.3/10 our score
See it on Amazon
- 4
Check itHQRP 100uf 250VAC CBB60 Run Capacitor fits
Best for 100 uF Craftsman replacements - 5
Check itTEMCo 400-480 uF MFD CD60 Start Capacitor
Best for high-capacitance start circuits - 6
Check itYosoo Health Gear CBB60 Capacitor
Best for 60 uF, 250 VAC motors
How we chose the best Craftsman air compressor capacitor
The best Craftsman air compressor capacitor must match the motor's electrical requirements first. For another brand, compare DeWalt air compressor capacitors.
The same matching rules apply across brands.
A familiar brand name or similar cylinder shape does not confirm compatibility. Many motors use round capacitors with different ratings and connections.
Shape can help you find the compartment, but it cannot confirm the electrical value.
We gave the most weight to capacitance and voltage clarity. Those two numbers define the basic match for most replacements.
Frequency and temperature ratings also matter where they are stated.
We also considered whether each option is described for air compressors, whether it is a run or start capacitor, and how clearly its wiring and mounting are described. A product meant for a start circuit should not be treated as a run part.
Clear wiring details help when the old part uses leads, terminals, panel mounting or snap in mounting.
Physical fit matters after the electrical match. Measure the old capacitor's body, check the available clearance and compare the terminal or lead arrangement before removing the old part.
Height can be a problem in a tight shroud. Diameter can matter where brackets or straps hold the body in place.
For a start-specific replacement, compare the choices here with our guide to the Best Air Compressor Start Capacitor. It explains why a start capacitor should not be treated as a direct substitute for a run capacitor.
The TEMCo option in this guide belongs to that start category.
Care also matters once the correct part is chosen. Keep the replacement dry, secure and away from moving parts.
Route leads so they do not rub on the cover or sit against hot surfaces. Reinstall covers and fasteners before power is restored.
Honest trade-offs come with each style. A wire lead part can be simple to connect but needs room for the leads.
A snap in part can mount firmly but only suits a matching bracket. A panel mount may not suit every motor compartment, so compare the old mounting before you buy.
| Product | Best for | Capacitance | Voltage | Wiring | Our score |
|---|---|---|---|---|---|
| Yancheng Yatai YATAI CBB60 Capacitor 60uF 300V AC | 60 uF run motors | 60 uF | 300 VAC | 2-wire leads | 9.7 |
| YWBL-WH CBB60 Run Capacitor | 120 uF run capacitors | 120 uF ±5% | 250 VAC | 9.6 | |
| BOJACK Run Capacitor 120 uF 250V AC | a 120 uF wire-lead replacement | 120 uF ±5% | 250 VAC | 9.3 | |
| HQRP 100uf 250VAC CBB60 Run Capacitor fits | 100 uF Craftsman replacements | 100 uF | 250 VAC | 9.1 | |
| TEMCo 400-480 uF MFD CD60 Start Capacitor | high-capacitance start circuits | 400–480 uF | 165 VAC | 8.8 | |
| Yosoo Health Gear CBB60 Capacitor | 60 uF, 250 VAC motors | 60 uF ±5% | 250 VAC | 8.6 |
Best Craftsman air compressor capacitor picks
The YATAI is the strongest overall match for a 60 uF, 300 VAC run circuit. The other choices are better when your original capacitor has a different capacitance or uses a start circuit.
Yancheng Yatai YATAI CBB60 Capacitor 60uF 300V AC: Best for 60 uF run motors
- 60 uF capacitance
- 300 VAC
- 2-wire leads
- 1.61 x 3.70 in cylindrical case
The YATAI matches a 60 uF motor requirement and uses 2-wire leads for replacement work. Its 300 VAC rating and compact cylindrical case suit many single-phase motor compartments.
Pros
- 60 uF option
- 300 VAC rating
- Pre-wired 2-wire design
Cons
- Only fits motors calling for 60 uF
- Confirm case dimensions before installation
YATAI's main advantage is a clear 60 uF and 300 VAC rating. That makes it a useful first choice when the old Craftsman capacitor carries those same numbers.
The match is specific, not general.
The capacitor has 2 wire leads and a cylindrical body measuring 1.61 x 3.70 in. That pre-wired format can simplify a replacement when the compressor uses the same two-lead arrangement and the mounting space is suitable.
It suits owners who prefer leads they can route and connect without adding extra connectors.
Its CBB60 design is intended for motor run operation at 50/60 Hz. The product information also describes a flame-retardant plastic case and use in air compressors, blowers, HVAC equipment and other motor-driven appliances.
That makes it a focused run option for a compatible motor.
Check the old capacitor before ordering. The 60 uF value must match the motor requirement, and the case still needs enough room for safe routing of the leads.
A smaller body helps in tight compartments, but it does not remove the need for an exact electrical match.
YWBL-WH CBB60 Run Capacitor: Best for 120 uF run capacitors
- 120 uF capacitance
- 250 VAC
- 50/60 Hz
- Panel mount
This CBB60 run capacitor provides a 120 uF, 250 VAC option for compatible Craftsman compressor motors. Its round plastic body is designed for panel mounting.
Pros
- 120 uF rating
- 50/60 Hz operation
- Overload-capable design
Cons
- 250 VAC rating must match the original
- Panel mount may not match every bracket
YWBL-WH is the best fit here when the original capacitor is marked 120 uF and 250 VAC. Its 50/60 Hz rating covers the frequency range stated for this CBB60 model.
Start with the old label, not with the product name.
The round plastic capacitor uses a panel mount and has a stated temperature rating up to 70 °C. It is described for two-phase motor startup applications such as compressors and air conditioners, so confirm the exact motor circuit before treating it as a Craftsman replacement.
Panel mounting suits only compartments that can accept that style.
The capacitance tolerance is ±5%. That detail helps you compare it with the markings on the removed part, but it does not override the need to match the compressor's specified value.
A tolerance range is not permission to choose a different nominal capacitance.
Use the How To Change Capacitor On Air Compressor? guide after confirming the replacement. Disconnect power and follow the compressor and capacitor safety instructions before opening the housing.
Confirm size and mounting as well as ratings, since those details affect a clean and secure install.
BOJACK Run Capacitor 120 uF 250V AC: Best for a 120 uF wire-lead replacement
- 120 uF capacitance
- 250 VAC
- 2-wire leads
- 50/60 Hz
The BOJACK offers another 120 uF, 250 VAC choice with 2 wire leads. Its cylindrical body measures 1.97 x 4.06 in, so compare the available motor-compartment space.
Pros
- 120 uF option
- 2-wire connection
- 50/60 Hz rating
Cons
- Longer body than some compact capacitors
- Not suitable when the original calls for another rating
BOJACK is another 120 uF option, with a 250 VAC rating and 2 wire leads. It suits a Craftsman motor that calls for those same electrical values and a wire-lead connection.
The rating match is the first requirement.
The body measures 1.97 x 4.06 in, and the capacitor is designed for 50/60 Hz operation. That makes its length an important part of the fit check, especially in a compact compressor shroud.
Measure the space where the old part sits before you order.
BOJACK describes this as a CBB60 motor run capacitor for applications including air compressors, blowers and air conditioners. Its stated capacitance tolerance is 5%.
Those details support the fit check, but they do not replace the original label.
The product information specifically advises checking the original capacitor's electrical specification before buying. Follow that advice because 120 uF is not a universal replacement value.
If your old part shows a different capacitance or voltage, this is not the right choice.
HQRP 100uf 250VAC CBB60 Run Capacitor fits: Best for 100 uF Craftsman replacements
- 100 uF capacitance
- 250 VAC
- Snap-in mount
- Compatible with Craftsman air compressors
HQRP is the clearest match in this group when your original Craftsman capacitor is marked 100 uF and 250 VAC. It uses a snap-in mount and is described as compatible with Craftsman air compressors.
Pros
- 100 uF rating
- Craftsman compatibility stated
- Snap-in mounting
Cons
- Check the 4.8 in height
- Not a match for 60 uF or 120 uF motors
HQRP is the clearest pick when your Craftsman compressor uses a 100 uF, 250 VAC run capacitor. Its stated compatibility includes Craftsman air compressors along with several other compressor brands.
That direct stated fit is its main advantage.
The capacitor uses a snap-in mount and measures 1.97 x 4.8 in. Compare that height with the old part and the available clearance around the motor before ordering.
A taller body may not clear a cover or bracket.
HQRP identifies this as a replacement rather than an original Craftsman part. That distinction matters because brand compatibility does not remove the need to confirm capacitance, voltage and mounting details.
Treat it as a matched replacement, not as an identical factory part.
If your goal is a Craftsman replacement with the same 100 uF rating, this is the most targeted option in this group. If the old part says 60 uF or 120 uF, choose a matching option instead.
The snap-in style also needs to match the existing mounting setup.
TEMCo 400-480 uF MFD CD60 Start Capacitor: Best for high-capacitance start circuits
- 400–480 uF range
- 165 VAC
- 50/60 Hz
- Quick-disconnect terminals
TEMCo is a start capacitor for a motor that specifically requires 400–480 uF at 165 VAC. Its rating is very different from the CBB60 run capacitors, so use it only when the original start circuit matches.
Pros
- High start-capacitance range
- Compact body
- Quick-disconnect terminals
Cons
- 165 VAC rating is not interchangeable with 250 or 300 VAC run capacitors
- Start capacitor role only
TEMCo is for a different job from the CBB60 choices. It is a 400-480 uF, 165 VAC start capacitor for a motor circuit that specifically requires a high-capacitance starting component.
That role sets it apart from the run options.
Its round body measures 1.78 x 3.33 in and uses 1/4 in quick-disconnect terminals. The stated operating range is -40 °C to +65 °C, and the capacitor is intended for single-phase motor and gear motor replacement applications.
Quick disconnect terminals can suit a motor wired for that connection style.
Do not use this as a casual substitute for a Craftsman run capacitor. Its 165 VAC rating and start-capacitor role differ from the 250 and 300 VAC run options above.
Using the wrong role can leave the motor circuit mismatched.
Choose TEMCo only after the original capacitor or motor documentation confirms the 400-480 uF start requirement. For a general start-capacitor overview, read Best Air Compressor Start Capacitor.
That guide helps explain why start and run parts should not be swapped by guesswork.
Yosoo Health Gear CBB60 Capacitor: Best for 60 uF, 250 VAC motors
- 60 uF capacitance
- 250 VAC
- 50/60 Hz
- Round cylinder shape
Yosoo Health Gear gives you a 60 uF, 250 VAC CBB60 option for a compatible Craftsman motor. Its 2 x 4.5 in body needs more clearance than the smaller YATAI.
Pros
- 60 uF option
- 250 VAC rating
- 50/60 Hz use
Cons
- Larger body than some 60 uF choices
- Confirm terminal and mounting fit
Yosoo Health Gear is a practical option when the original Craftsman capacitor is marked 60 uF and 250 VAC. It is a CBB60 cylinder for 50/60 Hz AC motor applications.
The electrical match must come first.
The body measures 2 x 4.5 in, making it wider and taller than the YATAI. Check the motor compartment and mounting arrangement carefully, especially if the existing capacitor sits inside a tight cover.
A larger body can be the deciding factor in a small housing.
The product information describes heat resistance, low leakage and overload capacity. Those are product features, not a guarantee that the capacitor will solve a motor problem caused by wiring, a bad switch or another failed part.
A correct capacitor cannot fix every electrical fault.
Pick Yosoo when its 60 uF and 250 VAC values match the old part and the larger body fits. Choose the YATAI instead when you need 300 VAC or a smaller stated body.
As with any option here, confirm terminals and mounting before removal.
What should you match before buying a Craftsman capacitor?
Match capacitance first, then voltage, motor role and physical connections. The original capacitor label is usually the fastest way to identify the required values.
Match the capacitance
Capacitance appears in microfarads, written as uF or MFD. The products here range from 60 uF to 480 uF, but those values are not interchangeable.
A 60 uF motor needs a capacitor selected for 60 uF. A 120 uF motor needs a 120 uF option, while a 400–480 uF capacitor belongs to a different start-circuit application.
Match the voltage
Voltage must meet the motor's requirement. The choices here include 165 VAC, 250 VAC and 300 VAC.
Do not choose by capacitance alone. A 60 uF capacitor at 250 VAC and a 60 uF capacitor at 300 VAC have different voltage ratings, so compare both numbers with the original.
Identify run or start duty
Run capacitors and start capacitors perform different jobs. For another brand, compare Ingersoll Rand start capacitors.
CBB60 products in this guide are run-capacitor options, while the TEMCo CD60 is a start capacitor.
The How To Bypass Capacitor On Air Compressor? guide may help explain the circuit, but bypassing a capacitor is not a normal repair. Use the correct replacement and qualified electrical help when the motor circuit is unclear.
Check terminals, leads and mounting
A replacement may use 2 wire leads, quick-disconnect terminals, panel mounting or snap-in mounting. Your new capacitor must connect securely and fit without rubbing against the motor, cover or wiring.
Before removing anything, take a clear photo of the connections and write down the original capacitor markings. Never rely on memory when reconnecting a motor component.
How do you replace a Craftsman air compressor capacitor safely?
Replace a Craftsman capacitor only after disconnecting power and confirming that stored electrical energy has been safely discharged. Capacitors can hold a charge after the compressor is unplugged.
Treat the part as energized until you have confirmed it is safe.
Read How To Use Craftsman Air Compressor? for normal operating and shutdown habits, then follow the compressor manual for service access. The manual instructions take priority for your model.
If you are not trained to work around motor capacitors, use a qualified technician.
Before installation, compare the old and new capacitance, voltage, size, terminals and mounting. Take a photo of the wiring before you disconnect anything.
Write down the old markings so you can check them against the replacement.
After installation, keep wires away from moving or hot parts and reinstall the motor cover before restoring power. Make sure leads do not rub on the housing or sit where they can be pinched.
Secure the capacitor so vibration does not loosen the connection over time.
A capacitor that swells, leaks, smells hot or repeatedly fails may point to another motor or electrical problem. Replacing it repeatedly without finding the cause can create a safety risk.
Stop and get the circuit checked if the same symptom returns.
If access is cramped or the wiring is unclear, pause the job and seek qualified help. Motor parts can be hard to reach and easy to miswire.
A careful check at each step matters more than finishing quickly.
After the cover is back on, run the compressor only as directed by the manual and watch for normal startup. Note any humming, failure to start, or overheating and stop use if those signs appear.
Keep the old capacitor label until the replacement is confirmed as the right match.
Verdict: which Craftsman air compressor capacitor should you choose?
The YATAI is the best Craftsman air compressor capacitor for a matching 60 uF, 300 VAC run motor. It is the first choice only where the old part or motor documentation calls for those values.
A different rating needs a different pick.
Choose HQRP for a matching 100 uF, 250 VAC Craftsman application. Its stated Craftsman compatibility makes it targeted for that rating.
Confirm the snap-in mount and the 4.8 in height before ordering.
Choose YWBL-WH and BOJACK when the original calls for 120 uF at 250 VAC. YWBL-WH uses panel mounting, while BOJACK uses 2 wire leads.
That connection difference can decide which one fits your compressor.
Pick Yosoo when a 60 uF, 250 VAC capacitor fits the motor and its larger body has room. Its 2 x 4.5 in size needs more clearance than the YATAI.
Choose it for the rating and fit, not as a general substitute.
Choose TEMCo only for a confirmed 400-480 uF, 165 VAC start circuit. It is a start capacitor, not a run capacitor for the other motors in this guide.
Its lower voltage rating also makes it non interchangeable with the 250 and 300 VAC options.
Before ordering, copy every marking from the old capacitor and compare the connection style and body dimensions. Check capacitance, voltage, frequency, temperature range, leads or terminals, and mounting together.
Missing details are a reason to pause, not to guess.
If the markings are missing or the motor still hums after a correct replacement, stop using the compressor and have the circuit checked. A humming motor can point to a wiring or motor fault beyond the capacitor.
Qualified help is the safer next step in that case.
Our top 3 picks at a glance
-
1
Best for 60 uF run motors
Yancheng Yatai YATAI CBB60 Capacitor 60uF 300V AC
9.7/10 our score
See it on Amazon -
2
-
3
Best for a 120 uF wire-lead replacement
BOJACK Run Capacitor 120 uF 250V AC
9.3/10 our score
See it on Amazon
Frequently asked questions
What capacitor fits a Craftsman air compressor?
The correct Craftsman air compressor capacitor is the one that matches the original capacitance, voltage, motor role, terminals and physical mounting. A 60 uF run capacitor cannot replace a 100 uF or 120 uF model just because the body looks similar.
Read the original label first.
Is a run capacitor the same as a start capacitor?
No. A run capacitor stays in the motor circuit during operation, while a start capacitor provides a higher starting boost and is normally removed from the circuit after startup.
The TEMCo CD60 is a start capacitor, while the CBB60 options here are run capacitors.
Can I use a higher voltage capacitor on a Craftsman compressor?
A higher voltage rating may be acceptable only when the capacitance, motor role, terminals and physical fit also match the original requirements. Never use a lower voltage rating.
Confirm the compressor motor specifications or ask a qualified technician before making a substitution.
How do I check an air compressor capacitor?
Disconnect power, release stored air, and follow safe discharge procedures before opening the motor cover. Then read the capacitor label and inspect for swelling, leaking or damaged terminals.
Our guide on How To Check Air Compressor Capacitor? covers the basic checks.
